Those of you with rockers and rods
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Oct 2009
Location: BRONX , NY
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Those of you with rockers and rods
ok... I've decided that while I'm installing the headers... (hopefully a few weeks) I want to go ahead and put in a set of 1.8 rockers.. now for those of you who have done this... what setup did you go with ? Does SLP make a complete setup ?? Do I only do rockers ? or do I do the pushrods with it ? Any info would be appreciated... Thanks in advance
#5
Hate to add to the lack of search, but has there been a before-after dyno on rockers/springs alone?
I ask this to say that improving the lift of the cam, even artificially, now that we have the intake/exhaust restrictions eliminated may be far more beneficial than before.
I ask this to say that improving the lift of the cam, even artificially, now that we have the intake/exhaust restrictions eliminated may be far more beneficial than before.
#7
Trending Topics
#11
#12
TECH Fanatic
iTrader: (2)
Join Date: Feb 2009
Location: Killeen, Texas.
Posts: 1,398
Likes: 0
Received 0 Likes
on
0 Posts
I feel that I'm on the edge of blowing a trans at the track as is right now. I decided against headers with a kid on the way, but rockers might be a inexpensive way to get a couple ponies and keep the trans together.
#13
I'm not going to the track again until the trans is built. Too much grip, it scares me.