whisler151

Here is a video of my 2007 CTS-V with Monster level 2 clutch with 18lb flywheel reving.

www.youtube.com/watch?v=IcGIq7zaJuM

garlicbreath

iTrader: (1)

Nice. Seems like a significant throttle response?

whisler151

The lightweight flywheel is awesome. The car is SO much more responsive in the lower gears. 1st and 2nd gears fly by now.

SoJersey05V

WOW!!! was going to do this combo, but scored a super-d-duper deal on an oem, and quie frankly oem has lasted me the 60kmi i've put on her so ill run the 2nd oem til she blows then do this!... i wish i could score a UUC FW to bolt up with the new clutch!

blemoine02

iTrader: (1)

whos 18lb flywheel did you use? alluminum or steel?

whisler151

Monster's. Their kits include everything from slave cylinder to flywheel. I went with the level 2 http://www.monsterclutch.com/level2clutch.html

Others have done the level 3 www.monsterclutch.com/level3clutch.html and love it. I'm not near that power so I didn't see the need.

02QSJOHN

can you get a video of the car actually accelerating through the gears?

woodnutz

I had a 15 pound RPS segmented flywheel in my gto for a short period of time. I toasted the darn thing and I was just a bolt on car....380/380 to the wheels. The lighter rps sucked at the track trying to launch the car, just was not heavy enough. Are you seeing the same things? On the street it was killer, but sucked on the track. I put in the monster stage 3, and it was badass! I hope to be getting a v this week, and I will be putting a monster in it.

06 6.0 GTO

When it comes time to replace my clutch i also will go with a light weight flywheel.

Its one of the few mods that make a difference you can actually feel.

bongva

iTrader: (7)

wow very nice! Im getting one for my camaro here in a few weeks. I wonder if anybody has a comparison video of stock to the 18lb flywheel.

Big Bu Bu

iTrader: (4)

Awesome. How is the driveability when pulling away from a stop light? Especially with the cam.

whisler151

With the cam its more difficult. Keep it at 1k and let out the clutch.

With the stock cam it was fine. I could even start in 2nd gear.

Makes the car way more fun to drive!

blemoine02

iTrader: (1)

What are some upgrade hydrolics that we can do like as far as the Hydrolic line and the Master cylinder?

JJSimon904

iTrader: (8)

There is a video out there somewhere of someone comparing the stock flywheel to a light one. I dont remember if it was here or on the other forum though.

626cts-v

just got my monster stage 3 clutch with the 18 flywheel and it only took about 7 weeeks. that guy steve the owner is a d... hope to be driving it by fri. have heard nothing but good things about it

whisler151

Were they backordered on the flywheels again?

uwood

They were back ordered over the Holidays. I have my stage 3 kit and 18lb fly sitting on my work bench now. Going in when I put the engine back in.

I ordered through GForce and ended up calling Monster to check when I was going to get it. Guy was nice enough to throw in the remote bleeder for free.

Shon Herron

iTrader: (25)

does the monster kits require the spacer or is it included or bought seperate?

SkullV

iTrader: (11)

The monster kit includes the correct length slave in the kit.

Shon Herron

iTrader: (25)

I do not see the V kit on the site, am I missing it!?!?