uLoSeAgAin

I am planning on getting a qtp electric cut out. I live in a small town and I dont know who I would be able to get to out in this siwtch. Where are good places to put the switch so its hid?

1 BAD BIRD

iTrader: (3)

Most people put it the ash tray or the center console cubby.

bob

uLoSeAgAin

How hard is this to do and logn would it take?

Biochem

Half hour... really easy. I ran the ground to a screw that holds the shifter and the positive to a wire that I ran through the dash, up past the radio, and to a pink wire where traction control or something goes (two switches above radio)...

Tudds

iTrader: (4)

I have a switch near your left foot rest. Its on the top of this thing plastic piece and theres nothing really behind it. When I switch it, it looks like I'm scratching my leg or something <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

URPREY

Mine will have a convertible top switch, and will mount in the factory location for that switch.

RedSS

I put my switch in the ashtray. be careful the when you drill it the thing is britle

<img src="http://us.f1.yahoofs.com/users/b3422bc1/bc/My+Photos/switch.jpg?BCP1859AZTwoSDNB" alt=" - " />

<small>[ October 30, 2002, 01:25 PM: Message edited by: RedSS ]</small>

Phil99TA

here's mine

<img src="http://12.42.47.6/phil/switch3.jpg" alt=" - " />

98blackSS

ashtray here.. Very convenient with an M6. I can rest my arm naturally on the armrest while cruising around and close the noise maker in a second when the po' comes by (handy with headers/no cats) <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />