Member, Big Turkey, came and detailed my WS6
05-20-2010, 09:58 PM
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2005
Location: Missouri City
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Member, Big Turkey, came and detailed my WS6 Member on here, Big Turkey, came by and detailed my '99 WS6 and did a fantastic job.
Not only was the detail thorough, well priced, and professional but he was also a great guy to hang out with and talk to while he was working on the car.
He did a two-stage polish with M105 followed with M205 and removed a HUGE amount of swirls that were in the car. I was very pleased with the results.
If anyone is looking for a good guy for a local detail I highly recommend contacting him.
Anyhow, I just snapped a couple quick pictures:
Not only was the detail thorough, well priced, and professional but he was also a great guy to hang out with and talk to while he was working on the car.
He did a two-stage polish with M105 followed with M205 and removed a HUGE amount of swirls that were in the car. I was very pleased with the results.
If anyone is looking for a good guy for a local detail I highly recommend contacting him.
Anyhow, I just snapped a couple quick pictures:
Trending Topics
05-20-2010, 11:39 PM
#9
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2005
Location: Missouri City
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Yep 
I paid him $220 for his work for a full detail (interior, exterior and engine bay). An exterior detail alone would've been a little cheaper. I would imagine that the price would change depending on the car and amount of work necessary though, so take that with a grain of salt. Your best bet would be to PM him if you're interested.
He was working on the car for damn near 9 hours. He doesn't cheap out on putting in the work it takes to get the car looking good
I paid him $220 for his work for a full detail (interior, exterior and engine bay). An exterior detail alone would've been a little cheaper. I would imagine that the price would change depending on the car and amount of work necessary though, so take that with a grain of salt. Your best bet would be to PM him if you're interested.
He was working on the car for damn near 9 hours. He doesn't cheap out on putting in the work it takes to get the car looking good
05-21-2010, 06:49 PM
#14
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2005
Location: Missouri City
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, he gave me two quotes and one was a LOT lower than the other....
Yep, taking off the side moldings is happening this weekend along with lowering it on BMR springs/SLP Bilsteins and BMR single adjustable PHB.
The Formula lettering is staying on though. It's my Wife's car and she likes people to know it's a Formula She says she wants longtubes on it so people can HEAR that it's a formula too, ha ha.
The Formula lettering is staying on though. It's my Wife's car and she likes people to know it's a Formula
She says she wants longtubes on it so people can HEAR that it's a formula too, ha ha. 
05-21-2010, 10:53 PM
#19