Any problems with manual cutouts?
#1
On The Tree
Thread Starter
Join Date: Jan 2010
Location: Stillwater/Oklahoma City, Oklahoma
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Any problems with manual cutouts?
Are there any problems associated with manual cutouts, such as exhaust leaks or the cap falling off? Thanks for the info!
#4
On The Tree
Thread Starter
Join Date: Jan 2010
Location: Stillwater/Oklahoma City, Oklahoma
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
I don't plan on taking the cap off after I just drove it. My car isn't lowered either. So the cap doesn't fall off when driving? Good to know, thanks!
#6
TECH Senior Member
iTrader: (71)
As long as you aren't an idiot it is pretty hard for something to go wrong. Tighten the 3 bolts down and make sure someone that knows how to weld does the welding on it.
I have taken mine off plenty of times at the track after I get there and before I leave.
I am lowered 1.25" and I can get mine off/on without having to jack the car up in about 1 minute.
I have taken mine off plenty of times at the track after I get there and before I leave.
I am lowered 1.25" and I can get mine off/on without having to jack the car up in about 1 minute.
Trending Topics
#11
On The Tree
Thread Starter
Join Date: Jan 2010
Location: Stillwater/Oklahoma City, Oklahoma
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Thanks the input everyone! I'm not too lazy to crawl underneath my car every now and then. It's not for track use. I just want a little more noise.