djm_e22

iTrader: (2)

I am about to spray an addition 250 shot of nitrous at my eagle forged crankshaft and I already am making 403rwhp just motor. So how much horsepower(please state rwhp or flywheel hp) and/or rpms have you thrown at your forged eagle crankshaft?

96capricemgr

iTrader: (1)

On the eagle forged stuff having the machining double checked is critical. After that they will take a lot of power, but then again so will stock.

Long as your machinist checked and corrected everything the crank should be fine for that.

robsquikz28

iTrader: (246)

**** people have broke those on motor only apps even. So to each is own and just be carefull with the crank. Either way if your making 400hp to the tires then expect to make a little over 210hp with the 250shot.

lifeisgood

iTrader: (4)

ive heard not so good things as well.
ive been told to stick with the factory cranks, or spend the money on a good one

vtec

iTrader: (1)

there is many many many people making 900+rwhp with those pieces of crap.

JB_97ws6TA

iTrader: (6)

there have been a few problems when people start pushing their cast cranks but as far as their forged cranks go I wouldn't hesitate to throw that much power at it. The number of people successfully running their products, forged or cast, vastly outnumbers the people that have ran into issues. Nobody ever mentions when their crank does what it is supposed to. I personally have never posted on the forum "well...cranks still spinnin'...thanks callies!!" It is kinda like the saying "they've built bidges for 40 years...suck one **** and now they're ***********"

gregrob

iTrader: (8)

I think you're thinking of the cast cranks from eagle. The forged stuff is generally really strong if the machining is touched up when installed.

skinnies

iTrader: (33)

Yep their cast cranks are junk, forged ones guys have good luck with. Then again I was just shy of 900 crank HP on the stock crank with no issues at all.

gregrob

iTrader: (8)

Yeah, I really dont get the point of buying an aftermarket stock stroke crank... The stock ones are plenty tough.

Were I spending money on a crank it would be a stroker.

suicidal racing

iTrader: (14)

eagle cranks can take more then your going to throw at it..big daddy with his drag radial sbf motor runs a eagle 4340 crank..he makes over 2k in hp and has ran 6.9x 1/4

Puck

iTrader: (17)

There are TONS of 1200+rwhp SBCs with forged eagle cranks.

If you had it machined and installed correctly it will easily take what you are throwing at it.

fuel

iTrader: (13)

i was making 800 at the crank on a 300 shot......