TravisA

iTrader: (4)

Will the 15x10 fit over rear lt1 brakes.

I searched and found a thread where someone said you need drag brakes on the rear?

http://www.summitracing.com/parts/CLL-7275105547/

BADHAWK51

iTrader: (1)

No they will not. I had to run drag brakes even with those I could not fit a charge card between the caliper and rim.

steveo346

iTrader: (18)

So then what kind of brake setup must one use to run these fawking beautiful wheels?

BADHAWK51

iTrader: (1)

Drag brakes work but if you had an old car with drum brakes no problems.

ryarbrough

iTrader: (18)

I looked at these a while ago. They don't make anything in a 7.5" BS and a 10" wheel with a 7" BS (the closest to F-body fittment that they will even make) is a custom wheel. They offered to make me a set, but I declined due to worries about brake clearence etc.

TravisA

iTrader: (4)

I'm going to run a narrowed rear so that won't be a problem with the backspacing. I was just hoping they would fit over the rear brakes...

BADHAWK51

iTrader: (1)

Travis just so you know you only have to run drag brakes on the rear with the Centerlines the fronts fit with no issues at all.

This is my car with the Qualifiers.

InferAl

Does anyone have any idea why they machine this ring in the mounting plate......it doesn't mount flush with that there

C ABEAR22

iTrader: (1)

I got an 01' SS and i just bought the centerline split spoke wheels 17x7 front with 15x10 rear 6.5 bs and my rears dont fit!! So i grinded and grinded till i was putting holes int he caliper and they still dont clear so i think im about to be buying some drag brakes for this POS!!!

joeZ96

iTrader: (3)

Another back from the dead...I assume you bought them then before reading Jeff's post above saying you will need to run drag brakes on the rear.

CRUE CAB

Breathing just alittle more life back into the old thread.
Just which rear brake kits will let these wheels fit?