dreamls1

iTrader: (25)

Hey guys thought i would share our Th400 swap article we just finished in Pontiac Enthusiast Magazine.

http://editions.amospublishing.com/P...spx?d=20101001

Page 45!

BlackScreaminMachine

iTrader: (17)

That should be a sticky, it really addresses all the issues people see.

dreamls1

iTrader: (25)

Thanks! we tried to address everything that might come up in the swap!

BlackScreaminMachine

iTrader: (17)

The only thing I would say that i wish there was more info on was the bracket fab info. I know that some people get a stock A 4 shifter base and mod it to work with a aftermarket shifter.

As I am not a fab guy but knowing what needs to be done would be a giant leap.

dreamls1

iTrader: (25)

I will try and scann it in the next few days, so it will be easier to view

z28kidd

iTrader: (2)

bump!!!! cant wait to switch to a th400

transmarobird91

iTrader: (6)

what do u think the drivability would be of this with heads, cam, gear, intake tb and maf.. im thinking about it..

z28kidd

iTrader: (2)

drive ability shouldnt be bad at all, even with a decent stall, my buddy with a 800whp supra th400, had no complaints with his, but i would like to know first hand from u guys as well

00silver6

iTrader: (4)

how the hell did you get the second bolt on driver side the one thats near the tunnel?

Z28/2002

iTrader: (27)

With a swivel socket and some extensions or a gear wrench

00silver6

iTrader: (4)

i wish it would of been that simple i have a csr shield w/arp bolts so that made it more of a challenge for me. i put the second bolt on the driver side in before jacking the trans up i should of did that on the next one up too but had to use my telescopic magnet tool, put the head of the bolt to the magnet and pushed it up in there then tightned her up. thats the way it goes sometimes though

Z28/2002

iTrader: (27)

Ohhh, didn't know you had the shield

Photochop

iTrader: (74)

Very good writeup guys.