Reputable brake repair shops in Houston area...
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Houston
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Reputable brake repair shops in Houston area...
Just looking to check out an issue I'm having with my ABS. ABS inop light is on, and LOW TRAC light will blink occasionally. I need to have the brakes bled and see if anything has crapped out...
I don't have the space/tools/time to get this done myself, so where is a good place to start? I worry about taking my car anywhere, so suggestions would be greatly appreciated
I don't have the space/tools/time to get this done myself, so where is a good place to start? I worry about taking my car anywhere, so suggestions would be greatly appreciated
#5
Teching In
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Houston
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Damn, well I have no means of getting it up with a jack right now to check things out. Go figure my bf left back to school the day that it started messing up. The jack, stands, and tools are all at his house and his driveway is currently occupied.
That's why I was looking for someone else to help me LOL
That's why I was looking for someone else to help me LOL
#7
9 Second Club
iTrader: (21)
Join Date: Mar 2008
Location: League City, Texas
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
^^^
Nah, her bf seemed cool for the brief time I met him. I don't know many brake specialists on the north side of town, only down here... With ABS it sucks, because there are SO many factors it could be, and you might spend some serious money finding out what it is. I had 3 different shops tell me 3 different reasons as to why my abs was acting up. All of which were over $800 to fix.
I decided to get up under there myself, and all it cost me was some time rerouting the new wires and some heat wrap.
Nah, her bf seemed cool for the brief time I met him. I don't know many brake specialists on the north side of town, only down here... With ABS it sucks, because there are SO many factors it could be, and you might spend some serious money finding out what it is. I had 3 different shops tell me 3 different reasons as to why my abs was acting up. All of which were over $800 to fix.
I decided to get up under there myself, and all it cost me was some time rerouting the new wires and some heat wrap.
Trending Topics
#8
Teching In
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Houston
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Yeah that's what I want to avoid -spending a bunch of money on these fools who THINK they know what's wrong with my car. I'm DD'ing a little Corolla for now Finally letting the "race car" take a break from driving all over Houston. I guess that means I better wait until I can take a look at it myself to make sure it's nothing menial.
And Jerry, HUSH - you know you love Matt
And Jerry, HUSH - you know you love Matt
#10
LS1 Tech Administrator
iTrader: (14)
Good luck Mufasa. Hope it turns out OK. Glad you have a daily driver now and the SS is now for joy rides only.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
#12
Staging Lane
iTrader: (3)
Join Date: Feb 2009
Location: Texas must secede!!!
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Yeah that's what I want to avoid -spending a bunch of money on these fools who THINK they know what's wrong with my car. I'm DD'ing a little Corolla for now Finally letting the "race car" take a break from driving all over Houston. I guess that means I better wait until I can take a look at it myself to make sure it's nothing menial.
And Jerry, HUSH - you know you love Matt
And Jerry, HUSH - you know you love Matt
#15
Teching In
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Houston
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Patrick! I actually got to park it in my garage and everything Gotta get it ready for racing season...
No, Robert. Y'all are definitely not those "fools". I just wish you were closer! It sucks having car problems when you're from NW Houston but are driving between Conroe/Woodlands and Clear Lake. Talk about frustrating!
Evin, I'll see ya Thursday probably...
No, Robert. Y'all are definitely not those "fools". I just wish you were closer! It sucks having car problems when you're from NW Houston but are driving between Conroe/Woodlands and Clear Lake. Talk about frustrating!
Evin, I'll see ya Thursday probably...