Dented Trannsmission Housing
#1
Dented Trannsmission Housing
Did a tranny mount on an automatic 95 LT1 TA today and noticed the bellhousing(?)-the part that is right behind the engine oil pan-is dented in a little. Not a huge dent, but it looks like maybe somebody jacked it up there at some point (maybe on a past tranny mount install?)
Could this cause problems? If so, what?
Could this cause problems? If so, what?
#2
Thats a thin sheet metal cover, as long as it's not hitting the flexplate/converter it won't be a problem. Some people just leave this cover off.
Last edited by Jays_SSZ28; 09-01-2010 at 09:32 PM.