Xer0ta

As in, put the 93-97 trans am rear bumper and hatch on my 94 formula? I love the way the bumper looks with the CETA panel and the raised spoiler as opposed to the lowered spoiler on my formula.

Would they bolt right up? Do I need the side skirts from the Trans am also?

bigj2717

iTrader: (15)

Yes they will bolt right up

Xer0ta

Thank you for the response! Any opinions on how a 94 formula would look with a TA hatch and rear bumper?

theskitztikwon

iTrader: (18)

98-02 side skirts and rear bumper from t/a looks good 93-97 not so much

Xer0ta

What about just the ta hatch / spoiler and the ws6 ram air hood. semi-firehawk clone style. i might not want to go as far as changing the rear bumper as it's mostly the raised spoiler look i want.

1995blacktattop

iTrader: (2)

i took these pics at indy a few years ago. it will give you an idea of what that would look like.

Xer0ta

Oh thats beautiful. Firehawk clone *wink nudge* Ty for the pics thats the route i'll be going now.

sjsingle1

iTrader: (1)

sjsingle1

iTrader: (1)

theskitztikwon

iTrader: (18)

3rd gens had the t/a spoiler why the hell not the 4th ^^^^ that is Mr Winky approved

meine96ws6

iTrader: (4)

^^^^ What is the difference in the side skirt and rear bumper from the LT1 and the LS1?^^^

MasterTomos

iTrader: (15)

The only thing different is the tail lights

TechCam97

iTrader: (5)

The Trans Am side skirts, rear bumper, and spoiler are exactly the same from 1993-2002. Unless you're referring to a 93-97 Firebird/Formula front bumper looking worse with Trans Am side skirts/rear bumper/spoiler than a 98-02 front bumper with the same setup. If so, I agree.

Rebob5

iTrader: (3)

Xer0ta: I did this with my 95 formula. I bought a t/a hatch, rear bumper cover, side skirts and tail lights (went back to LT1 style tail lights). Everything will bolt up 100%. I loved the look of the formula when I first bought it 8 years ago but then decided that I wanted the more agressive look of the T/A. I am glad that I did it. Here are a few before/after pics..

Bad before pic, LOL!!


After

Atomic02

iTrader: (33)

be ready to drill alot of hole in your rocker for the t/a side skirts...

fastredlt1

Im also doing the side skirts and need to know if there is a templet to use for all the holes that need to be drilled?

Swiat34

iTrader: (9)

Yes, The side skirt.

JOHNNY59

iTrader: (398)

no need to drill holes in your rocker panels! just use screws on the bottom side and 3M double sided tape on the top.

BCKNBLK

iTrader: (3)

To get the wing you need to swap the full hatch and glass. I was going to do it on the red trans am but couldn't find the full package locally.

SBBird

I did the same on my 93 Formula. I love the look. However, I just need to repaint the bumpers. The red didn't match as close as I would've liked. Doesn't look bad without T/A side skirts