Smooth firewall option for steering column
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: Dublin, CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Smooth firewall option for steering column
I have flattened the firewall in my '72 Chevelle and have added hydroboost and the bracket for a hydraulic clutch. I am currently looking for ideas to seal the opening from around the steering column into the interior of the vehicle.
I have looked at several options including a 4" wide seals-it grommet on the exterior of the firewall. Does anyone have any suggestions that I may have not explored or thought of yet? Obviously I am a bit short on space which is one of the major limiting factors to my options.
Thanks in advance, BRIAN
I have looked at several options including a 4" wide seals-it grommet on the exterior of the firewall. Does anyone have any suggestions that I may have not explored or thought of yet? Obviously I am a bit short on space which is one of the major limiting factors to my options.
Thanks in advance, BRIAN
#2
Launching!
iTrader: (1)
Brian, there are lots of options, check out the 'Floor Mounts' from places like Ididit, Flaming River, Borgeson. Flaming River has a floor mount specifically for your model Chevelle.
Mike
Mike