lifter trays?!?!
#2
TECH Senior Member
#4
TECH Senior Member
iTrader: (4)
While it won't hit the tray due to lobe height, the lower base circle of the cam required for higher lift does allow the lifter to run lower in the tray. There have been some who have speculated this can cause oil starvation and it is one of the reasons that the Morel lifters are slightly taller.
Trending Topics
#9
10 Second Club
iTrader: (10)
I see that you have figured this out by looking at a cam, but elaborated on it for others that may question whether or not this is true.