fly pantera

iTrader: (9)

i dont street race much,but lets say i was to encounter a cammed ls1 or bolton c5zo6 on the street from a roll.will my termi have a chance.

mods
filter,h pipe,catback,solid,4.10s

i have a 2.8 upper for it but havnt installed it,maybe i should wait to take my car outa the garage to encounter someone.

share your cobra beating stories so i know what to expect,i dont want to drop the hammer just to see liscense plates

Deerhunter-Z28

Prolly a driver race w/ the Z06, on the cammed car it depends on the cam and what type of supporting mods. If it's a well thought out cammed car w/ supporting bolt ons he will win. This is assuming you get that pulley installed first.

70hemicuda

iTrader: (33)

i would say we could find out just meet up, but my cars broken. lol

Fondle

iTrader: (4)

i will run you able, in your old ss haha

brian_rs/ss

with a baby cam and slightly better than stock heads i put about half a car on a bonestock 03 from a 20 roll.

JohnFrazee02SS

iTrader: (23)

whats a stock terminator run in 1/4?

ragu1585

iTrader: (4)

you should lose to bolt on z06's and cammed car's as your car sits now, but put the pulley on and it should be a different story... should

DPRock

iTrader: (9)

Just the little mods I have I beat my my buddys 2005 procharged mustang with boltons I know its not a cobra but he dyno's 560 cant remember how much to the wheels.

Deerhunter-Z28

Either he can't drive worth a f.uck or he's lying about the power he makes. If he makes 560 to the wheels he would toast your *** with your mods.

DPRock

iTrader: (9)

I guess he doesnt know how to drive I firgured the same thing. Unless Im wrong with my engine mods but Lg gave me the specs of the cam the 1st owner had them install. Found invoices on the other mods in the glove box. The engine makes 560 but I cant remember what he makes at the wheels.

SunsetRamair

iTrader: (1)

I beat a 2011 cobra by 1 1/2 cars with my cammed C5 coupe. We ran four times from a stop. And a roll with the same out come

ragu1585

iTrader: (4)

stock short block 3v? i think 500 520 is on the high side if it is a stock short block 3v.... i know a friend used to have a turbo'd 3v and he was limited cause of the short block...

fly pantera

iTrader: (9)

i was actually gonna go up north with some peeps from s.a this past weekend.

Fondle

iTrader: (4)

you should come up sometime

stoverz28

iTrader: (8)

Tiny and I were always a really close race. If we went from a high roll he would get me, a low roll i beat him every time. I know that the only reason I could keep up is because he is so big and usually shifts like my grandma. Other cobras would walk me easily.

jay7199

iTrader: (9)

I call shotgun if this goes down

05 GSXR 1XXX

iTrader: (16)

Install the 2.8, tune, and go have some fun!

gtslo88

iTrader: (1)

I am a pretty much bolt on LS2 and I also live in SM. Ive taken down a few bolt on cobras but a bolt on z06 is no slouch and easily pulls me now and when I had my cam

winters97gt

Bolt on Z's trap 116-120mph. Just depends on how fast your car is.

ragu1585

iTrader: (4)

if u talkin track, ide put money on the z06 everytime... my 2.9 upper only cobra was trappin about 114, best of 12.0 (hurt clutch).. but i also wasnt the best of drivers...