View Full Version : 304 Stainless Race Mufflers 3", 3.5", 4", 5"


Motovative
01-26-2011, 03:50 PM
http://i56.tinypic.com/2s987tk.jpg

Full 304 stainless steel. We are going to carry them in 3:, 3.5", 4", and 5" diameters, in both 5" and 9" overall lengths. Fully tig welded with a perforated full stainless core. These are the lightest race mufflers available, at a fraction of the cost of competitors like Burns.

We are going to do a group purchase to kick things off, and get our buy in taken care of. I need 10 guaranteed orders to get this through. Ill keep a running list of buyers here and the order will be placed when the minimum is met


Buyers :
1.
2.
3.

Pricing is as follows:

9" Overall length mufflers -
3" - 81.61$
3.5" - 91.47$
4" - 104.73$
5" - 115.61$


5" Overall length mufflers -
3" - 79.83$
3.5" - 88.34$
4" - 99.74$
5" - 114.04$

Josh@KY-Turbo
01-26-2011, 05:39 PM
Are these Vibrant Performance Mufflers?

Motovative
01-26-2011, 05:48 PM
Yep Josh

Josh@KY-Turbo
01-26-2011, 06:03 PM
Hell of a deal. I use them on alot of my Race setups.

iWon
01-26-2011, 07:39 PM
Those would be sweet to have before the x pipe on some true duals... but isn't that pretty expensive for such a tiny little muffler?

Motovative
01-26-2011, 10:03 PM
They are stainless, not mild steel. They are actually pretty cheap for a tig welded stainless unit


Compare to Burns :

http://www.burnsstainless.com/ultra-lightmufflers.aspx

SS4Luck
01-27-2011, 04:26 AM
is there enough meat on the end of these to slip over a collector?

Im looking for bullets to swap to at the track so i can run a quiet street exhaust and a badass setup @ the track. My car is just too low to put flanges on so i need to keep slip fittings

Motovative
01-27-2011, 06:08 AM
Yes they are meant for slip fit

iWon
01-27-2011, 08:10 AM
Nice. I wonder how much noise reduction they would actually offer if used right before the x pipe in conjunction with some other mufflers on the end of the system.

Motovative
01-27-2011, 09:42 AM
About as much as bullet mufflers

Cheeks
02-04-2011, 01:07 PM
I'll be contacting you soon for some of the 5 inch mufflers, 3" size. I need them for my hoopty for street season

speedracer2536
02-04-2011, 02:57 PM
I'd be interested if i could save on shipping and pickup since i am local to austin.. LMK

Motovative
02-04-2011, 03:14 PM
Not a problem, but I need to have an order of atleast 10 of these mufflers. Let me know who wants to get on the list

BES Stroked Nova
02-04-2011, 07:56 PM
I wonder if these mufflers are a legal "muffler" for the lsx real street class?

and also I measured my Kooks headers, and came up with a little shy of a 3.5" collector size. I got their race 3.5" style collector.

thanks for any help

Motovative
02-04-2011, 08:22 PM
Im honestly not too sure on the class rules as far as these are concerned. Is there a db restriction that they have to meet?

Lets get some orders in guys :)

06X6spdGTO
02-04-2011, 09:20 PM
what kind of packing is in them??? Im looking for something a little louder than my SLP Loudmouth II mufflers. (I had the Loudmouth I and it was ear piercing!!) i would need a 18 1/4" overall tho.

Josh@KY-Turbo
02-04-2011, 10:33 PM
I wonder if these mufflers are a legal "muffler" for the lsx real street class?

and also I measured my Kooks headers, and came up with a little shy of a 3.5" collector size. I got their race 3.5" style collector.

thanks for any help

Yes they are class legal. They are classified the same as bullet mufflers. I have used them on several Down Pipes where Mufflers were required. IO have never had a customer come back with issues being legal.

speedracer2536
02-05-2011, 11:37 AM
Im down for one.. Have any sound clips on an lt1 car? The 3" version? i'd say once i can hear it i will send you some money for one..