View Full Version : Any aftermarket Door Panel makers???


jthunderz28
02-19-2011, 02:26 PM
Outside of cruising the junk yards or doing hack jobs to fix the crack on our door panels for us 4th gen guys, where do you guys go to replace them with a quality piece???????????

Let me know.

Thanks

y2k_ta
02-19-2011, 11:43 PM
Doesn't sound like you want plain ones, but Wolfe Race Craft makes them.

jthunderz28
02-20-2011, 05:10 AM
Doesn't sound like you want plain ones, but Wolfe Race Craft makes them.

Plain is good as long as its a quality piece that matches my stock interior.

y2k_ta
02-20-2011, 10:49 AM
Plain is good as long as its a quality piece that matches my stock interior.

When I say plain, I mean flat as a board with a hole for the handle to poke through :)

You could always cover them with your choice of vinyl if you wanted. I made my own panels for my race car out of a sheet of plastic, and I covered them with vinyl to match the interior.

y2k_ta
02-20-2011, 10:51 AM
Wolfe is a site sponsor! Here is a link to their aluminum panels.

http://www.wolferacecraft.com/detail.aspx?ID=784

t/a98
02-20-2011, 08:01 PM
There is a write up somewhere on here on how to keep your plastic from cracking. It basically involves removing every other staple in the rubber that touches your window glass and is stapled to the plastic door stuff..

Paul Bell
02-20-2011, 08:33 PM
UUMMM...it's a sticky in this forum :eyes:

SSPerformance
09-24-2011, 05:07 PM
i got these from a guy on yellow bullet... pm me for info if your interested
http://i27.photobucket.com/albums/c182/dalejr38/IMAG0050.jpg

Big Chuk
09-29-2011, 03:20 PM
Glad I got a spare set!