Sweet_SS

but, where and the hell is the the TB set screw? If there is one at all I need to adjust for my IAC counts. This is on my 02 Camaro.

Thanks.

RARON455

iTrader: (35)

Itll be on the passengers side of the throttle body, there is a crescent shaped wheel with the cables attatched to it, there is a screw that you can turn to open or shut the throttle body blade, that screw will be against the wheel (lever).

Sweet_SS

Thanks man.

Sweet_SS

I don't see the screw

bww3588

iTrader: (49)

later 00+ didnt have an idle screw...

if it did it would be right here...

Sweet_SS

Crap

Thanks

anthony.fatica

iTrader: (10)

I don't know if you were including 2000 or not, but my 00 does have one...


Also, to the OP, if you don't have one I don't see that it would hurt anything nor be all that hard to by a small set screw and drill n tap a hole to make one

Sweet_SS

I found it. Its under the flange that hold the throttle on the TB.

Jon@Texas-Speed

iTrader: (18)

I'm pretty sure they all had set screws on V8 cars.. I have yet to see a car roll though here without one.

Jon