Porting the FAST 102
06-22-2011, 07:39 PM
#1
Staging Lane
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Porting the FAST 102 Who would you guys choose to port a FAST 102 cathedral intake?
Planning on P&P 243's later on, to go with my cam only setup now. Just don't want to send the intake to someone who will ruin it. LOL
Planning on P&P 243's later on, to go with my cam only setup now. Just don't want to send the intake to someone who will ruin it. LOL
06-23-2011, 03:44 AM
#4
They have a thread that is a comparison of their ported model.
However, i checked and the shop that does the porting is Peaks.
I did my heads, cam, IM, TB, Headers, ETC. all at the same time so I cant really tell you.
However, i checked and the shop that does the porting is Peaks.
I did my heads, cam, IM, TB, Headers, ETC. all at the same time so I cant really tell you.
Last edited by My6speedZ; 06-23-2011 at 03:53 AM.
06-23-2011, 10:12 AM
#6
FormerVendor
iTrader: (7)
Join Date: Feb 2011
Location: Denver
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Porting FAST 102 Peak Speed Shop would be glad to help you. Here is our web site for more information: http://www.peakspeedshop.com/
Trending Topics
06-23-2011, 08:42 PM
#8
We opened up the intake then bolted the base to the heads, and port matched the cylinder intake runners the base, and then we placed the runners to the base, then port matched the runners to the base with chriss 1313. It took about 2 hours with a dremel. I just dont see what else they can port besides that for 500 plus dollars. You'd have to see it in person to see what im talking about. Its really a well built intake. You can remove all of the runners and do as you wish. I'll try to post some pics for you guys tomorrow.
