1994 z28 - Forged 383 AFR $6900 Possible Trade
08-31-2011, 06:35 PM
#1
Teching In
Thread Starter
Join Date: Mar 2010
Location: Fostoria, Ohio
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
1994 z28 - Forged 383 AFR $6900 Possible Trade Year: 1994
Make: Chevrolet
Model: Camaro
Price: $6900
Mileage: 126000
Private or Dealer Listing: Private Listing
Location (State): OH
Color: Black
Transmission: Automatic
Drivetrain: Rear Wheel Drive
1994 Z28 383 LT1
I have a 1994 Camaro Z28 T-top car with a 383 LT1 engine. This car is scary fast and was built as a Street/Strip car in mind and does not have PS or AC. Engine has less than 600 miles on build, car has 126,000. It is in good shape with many upgrades to not only the engine but entire drive line and chassis. The interior of the car is in pretty good shape with the exception of the normal headliner sag and wear on leading edge of drivers seat. The body is in good shape but does have some blemishes but nothing terribly bad. This car is a steal at this price but I'm ready to move on to something different for a winter project. With some minor mods this car can be very streetable.
Here is a list of components and modifications done to the car:
Block baked
Bored .030
4 bolt splayed Eagle mains
Align honed Mains(standard bearing size)
Moroso 8 quart pan
Melling HV Oil pump
OC 4340 3.75 Crankshaft
OC 4340 I-beam 5.7 rods
SRP -5cc FT Forged pistons
AFR #908 180cc CNC Ported Heads
Crane 1.6 Roller Rockers
Comp Cams Magnum 7.200 Hardened Pushrods
Bullet Racing Cam .23X - .24X @ .050 110 LSA
Lloyd Elliot Ported Intake
Summit Racing Dual 58mm Throttle Body
Vortech Elbow
SLP Cold Air Intake
PaceSetter Ceramic Coated 1.75 Primary Headers
MSD Cap, Rotor, Wires on a AC Delco Opti
Prothane Engine Mounts
Aeromotive Adjustable Fuel Regulator
36 lb. Venom Injectors
SFI 18.1 Neutral balanced - Professional Products Dampener and TCI 153 tooth flexplate
Edge Racing 3800 Stall 9 inch Converter
TH400 with trans brake and RMVB - Built with all Coan internals
B&M Mega Shifter
BMR TH400 Crossmember
BMR SFC
BMR Adjustable LCA
UMI Adjustable Panhard Bar
Please NO LOW BALLERS. I would be open to partial trades for tools, metal lathes, Bridgeports w/converter, older muscle cars, Motorcycles(cruisers, not crotch rockets). Let me know what you have, all I can do is say no.
I'm not always available to answer my phone so leave a message and I will call you back or just text. I am pretty firm on this price so please keep that in mind when offering trades.
You can reach me by calling four, one, nine, 619, 2, one, five, nine Please no calls after 9:00pm My name is Mark
Last edited by Icematrix69; 09-10-2011 at 08:09 AM. Reason: change
09-10-2011, 08:06 AM
#6
Teching In
Thread Starter
Join Date: Mar 2010
Location: Fostoria, Ohio
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
