turyg ls1

iTrader: (2)

ok guys I have a wheel hopping problem when power shifting 1,2,3,&4 my suspenson are panhard bar ,Lca,lcarb & eibach pro kit springs with bilstein hd shocks ... I noticed today thar my rear wheel bearing has play in it when I grab the wheel and move it UP AND DOWN could that cause it to wheel hopp...? Any advise would be greatly apprecited

3 pedal SS

iTrader: (1)

You need the LCA relocation brackets. The wheel bearing wont help,fix it.

elmarro

+1

ls1ya

iTrader: (2)

He has them....

turyg ls1

iTrader: (2)

already have those on...

libertyforall1776

iTrader: (2)

Check your torque arm mount points at both ends and trans mount -- any problems at those locations could result in wheel hop. Also, are your springs very old/sagging?

BMR Tech2

iTrader: (5)

This.

Check this out. The factory TA and trans mount suck.

turyg ls1

iTrader: (2)

torque arm mount is new and trans mount good also but I'm still gonna order an after market 1 and the springs I bought a 1 year ago...

turyg ls1

iTrader: (2)

I think I might need the motor mounts cause when I pop the clutch out at regular idle and then give full throttle it sounds like my y pipe is banging against somthing ....

bayer-z28

iTrader: (14)

^ ......... The floor board?? It's common for some Y's to hit the pass floor.