Mach 1 vs Turbo Tc
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2011
Location: Winchester,Va
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Mach 1 vs Turbo Tc
Was nice out yesterday, so i was driving the mach heading up Rt81 to a friends house to watch the deadskins. I just got my welds to fit, et front runners and et streets on the rear. I was in some traffic and i notice a car rollin up behind me. It finally got right in behind me and i notice it was a first gen Tc with a front mount. I had someone in front me and he was up on my ***. So i passed the car in front of me when i got some opening, left it in 6th and the little scion was still on my ***. I made it around the car but the scion didn't. Once he got a open space he flew around the car that was blockin up the road and came up beside me. I saw him coming so i put it in 4th and when he got up to me,spooled up the turbo some. We where right about 70mph and there where car about a 1/4 in front of me,his lane was open. So he down gear and nailed it, i stuck it in 3rd,the Tc had about a half a car head start. I stop his pull and was beside him when i shifted to 4. I got over in front of him at about 100. i hit 5th and run up to about 140ish. I was a ways out at that speed, hard to give a def, but at least 5-7 car lengths.
He got off the same exit i did and he ask wtf is done to that?? is it supercharged? I informed him it was turbo'ed and I asked him if how much his made at the wheels and he said 400. I don't know about that, 400 in a 2800 lbs car should of beat 430 in a 3450 lbs car.
My car again is a 03 mach 1.Has mmr turbo kit. 70mm master power turbo, open dp, 3.55's, new precision 600hp front mount and hot side pipeing(haven't retuned it yet,i really need to),Stock long block, tubular k member,coil overs on the front, stock t-56 o4 cobra tran and spec stage 3 clutch. On 7.5 lbs it made 430hp and 458 ft lbs . Haven't dyno'ed it recently.
He got off the same exit i did and he ask wtf is done to that?? is it supercharged? I informed him it was turbo'ed and I asked him if how much his made at the wheels and he said 400. I don't know about that, 400 in a 2800 lbs car should of beat 430 in a 3450 lbs car.
My car again is a 03 mach 1.Has mmr turbo kit. 70mm master power turbo, open dp, 3.55's, new precision 600hp front mount and hot side pipeing(haven't retuned it yet,i really need to),Stock long block, tubular k member,coil overs on the front, stock t-56 o4 cobra tran and spec stage 3 clutch. On 7.5 lbs it made 430hp and 458 ft lbs . Haven't dyno'ed it recently.
Last edited by 03turbomach1; 10-24-2011 at 11:42 AM.
Trending Topics
#18
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2011
Location: Winchester,Va
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I think i got you though the 1/4, Your bike vs the camaro. even though you was freight training it at the end. I know with me being 215 and you weighting 150 i slow the bike down a good bit.
#19
Have a 3rd party with a cell phone park a mile up the road as a look out. No way you will get caught then. We did this as long as I could remember and no one has ever gotten caught.