Who to entrust to do a custom grind cam? Futral or Ed Curtis?
#1
Who to entrust to do a custom grind cam? Futral or Ed Curtis?
My car is a 2002 Trans Am WS6 with long tubes, true duals, lid, etc. Stock 241 heads and I'm looking to be over 400rwhp and over 400rwtq. I know both are great at what they do and can get the job done, but I'd like some feedback from you guys on who you'd choose and why. I know Ed's cams are ground by Comp and Futral's cams are ground by Cam Motion. Will that make much difference? Would also love feedback from anyone who has got a custom grind cam from either one of these guys.
#10
I know everyone on here loves EPS, but I really want to keep this thread about Futral and Ed Curtis cams.
Anyone had either guy custom spec them a cam?
Also, can anyone elaborate about what lobes each use? I'm sure each has their own proprietary lobes.
Anyone had either guy custom spec them a cam?
Also, can anyone elaborate about what lobes each use? I'm sure each has their own proprietary lobes.
#12
LS1Tech Premium Sponsor
iTrader: (40)
Futral specced out the turbo cam in my 04 Silverado, I am happy with the performance and would have no issue using Futral agian. Ed over at Flowtech Inductions is very knowledgeable and could easily spec you out a cam that will either meet or exceed your needs. You honestly couldn't go wrong either way.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
#15
TECH Enthusiast
iTrader: (10)
Who grinds the cams for Cam Motion? How many cam mfgs are actually out there? There are many brands of cams but I'm not sure if it's like other products where only a couple of houses built all the parts.
Crower
Crane
Lunati
Comp
Isky
I think all these places actually MAKE cams. Most speed shops buy cams ground on their lobes. I noticed Crane has some killer looking LS1 grinds (240/246 .600/.600) but I can't find jack crap on Tech about them.
Crower
Crane
Lunati
Comp
Isky
I think all these places actually MAKE cams. Most speed shops buy cams ground on their lobes. I noticed Crane has some killer looking LS1 grinds (240/246 .600/.600) but I can't find jack crap on Tech about them.
#19
TECH Fanatic
iTrader: (20)
And if there is this so called "pile" take a pic and make sure to get the part number in there as well.