WTS 2002 LS1 and T56
12-12-2011, 04:10 PM
#1
WTS 2002 LS1 and T56 Category: Engine - Complete Motors
Price: $3200
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): MD
Item Condition: Used
Engine: LS1/LS6
LS Engine?: Fits LS Engine
Motor and trans are out of an 02 camaro with 49k miles. I purchased it through Fran at Race Proven Motorsports they pulled it out of a customers car.
Motor: Made 417/389 through 4.10s and 28" E.T. streets Deposit reieved
-Stock ls6 intake manifold
-Stock TB
-Stock 241 heads with basically new valve springs that came with the EPS cam kit(200 miles of run time tops)
-EPS 234/246 .601/.606 112+2 cam(200 miles tops, installed by RPM)
-Brand New Melling 10296 High Volume Oil Pump
-Brand New LS2 Timing chain
-Brand new SLP 25% U/D
-Brand New CTS-V Oil Pan and pickup
-Brand new Metco Breather
-Refurbished Delphi Alternator(200 miles)
-Brand new starter
-Brand New Waterpump
-Brand new coolant crossover lines
-Brand new Coolant, IAT, Oil Pressure, and Oil level sensors
-Stock MAF
-Low mileage G8 GT coil packs with new MSD plug wires
-New Intake manifold gaskets
-No A/C or Power Steering
-Will not come with wiring harness or motor mounts
-Will include new PCM with RPM tune for $200
Trans: SOLD
-49k mile T56 out of the same camaro
-No grinds, no popping out of gear etc performs flawlessly
-Quicktime SFI bellhousing
-Pro 5.0 Shifter with short stick and hurst leather ****
-Mcleod Original Street Twin Clutch
-Mcleod Master
-Remote Bleeder
Prices are firm:
Motor-$ 3200 Deposit recievedTrans and clutch $2000SOLD
Located in Harford County MD, not willing to ship at the moment. Also not willing to part out motor or trans setup.
http://www.youtube.com/watch?v=bjDGk..._order&list=UL
http://www.youtube.com/watch?v=SEtZT13zvAk
Last edited by itsslow98; 12-18-2011 at 09:55 PM.
12-12-2011, 11:14 PM
#5
Ill do $300+shipping on the driveshaft. It was custom made and I was told it would handle whatever i threw at it. It fit like a glove. I will not be pulling that out until i pull the motor in case someone wants to drive the car before buying the motor and or trans.
Trending Topics
12-14-2011, 02:47 PM
#8
Pm sent ^^^
Trans is pending sale locally. Bellhousing and clutch master will be for sale seperate however.
Quicktime Bellhousing(has a hole cut in it by previous owner for inspection purposes i guess. $300
Mcleod CNC adjustable clutch master $100
Trans is pending sale locally. Bellhousing and clutch master will be for sale seperate however.
Quicktime Bellhousing(has a hole cut in it by previous owner for inspection purposes i guess. $300
Mcleod CNC adjustable clutch master $100
12-18-2011, 12:40 AM
#12
QuickTime bellousing is off the car and ready to go $300+ actual shipping
Psi conversion harness is also ready to go with the optional fbody fan plug ins $400 plus actual shipping
Kooks 1 3/4 fox swap long tubes. Mild steel that I will be sanding and painting with header paint for the buyer. $380+ shipping
Custom made steel driveshaft for ls1 t56 to 8.8. Only 200 miles on it tops. $300+ actual shipping
Psi conversion harness is also ready to go with the optional fbody fan plug ins $400 plus actual shipping
Kooks 1 3/4 fox swap long tubes. Mild steel that I will be sanding and painting with header paint for the buyer. $380+ shipping
Custom made steel driveshaft for ls1 t56 to 8.8. Only 200 miles on it tops. $300+ actual shipping
02-07-2012, 03:07 PM
#18
Does driveshaft come with yoke, any pics of it? Did you uses AJE kmember, i ask because that way it should be the length im needing? what kind of exhaust did you you have hooked up to the Kooks?
