02anti_vnm

iTrader: (32)

Like it says I'm thinking about selling my fast and getting a carb style intake. Not sure what would be best though. Looking for suggestions

Car is a forged 346 with afr heads and pt76gts. The car made 832rwhp 804rwtq on pump gas and 18 pounds so the car makes awesome power but I'm going bigger turbo soon and want to run a carb style intake and an elbow. Which ones have the best results?

Thanks guys

Bloodbath

vic jr or super vic for price

tripblackls1

iTrader: (11)

Why do you want a carb style intake ? With a elbow they have poor airflow distribution
Your better off with the fast intake , if you insist on upgrading look at sheetmetal intakes or the proflo or holly hi-ram

02anti_vnm

iTrader: (32)

how good are the pro flo manifolds? i havent really seen much about them i just know alot of people run the victor jrs and and elbow

tripblackls1

iTrader: (11)

The proflo /holly hi-ram is about the best fi intake you can run without going sheetmetal

ws602

iTrader: (2)

What heads?

stevieturbo

What intake do you currently have ?

And more importantly. How much hood clearance do you have ? That's going to dictate which intake and elbow you have room for.
I'm sure it would make sense that the taller the intake the better, and again the smoothest elbow the better. Both of those mean a very tall clearance height.

02anti_vnm

iTrader: (32)

Big bore AFR 225s

Stock hood at the moment hopefully a sonoco cowl hood by spring

ws602

iTrader: (2)

mast intake

MattSapp95_T/A

iTrader: (35)

Like other have said on a carb style the elbows tend to hurt flow...

I run a vic Jr with a Fast 4150 4 barrel style throttle body and a carb hat..

I don't know how much hood clearance you have but here are a few pics...



Before powder coating..

02anti_vnm

iTrader: (32)

I like that setup ^ ALOT but I think I'm going to go with a pro flo intake tho

stevieturbo

I'd have previously said the ProFlo would be better. I'm not convinced now it has sufficient plenum volume though to make it worthwhile

A tall carb intake with proper elbow could be better

Or an LS6 lol

02anti_vnm

iTrader: (32)

I'm running a fast 92mm setup right but I'm worried about it exploding when I start pushing it

7second

iTrader: (1)

the holley tunnel ram is nice

bad6as

iTrader: (17)

i have a ls6 on mine, i went 9.3 at 150 of 16psi in a 3250lb car. turbo was maxxed out, im upgrading my turbo and im looking for a pro-flo manifold to use this go around. ls6 intakes have made over 1k wheel but im sure they would start getting choaked up

slippi84

iTrader: (4)

Def flow better with a 4150 intake a Aarons elbow and a 102 tb.

Bob@BruteSpeed

iTrader: (16)

The FAST 92 is a good intake, much, much better than the FAST 90. I wouldn't worry about your 92, it is a very good intake manifold. Bob

slippi84

iTrader: (4)

GMPP intake with Aarons(6061.com) intake