jdhommert

iTrader: (2)

I have a MTI stealth cam II that was bought as a whole cam kit from MTI way back in the day. They aren't in business anymore, and I really need to find out what kind of springs they used to use in their cam packages. Do any old school guys here remember?

Its a single spring obviously..the springs look to have a yellow stripe on them iirc..i can post pics if that helps?

jdhommert

iTrader: (2)

Can anyone help?

mattster03

iTrader: (22)

I found the chart about halfway down this page to be really helpful in ID-ing my springs. You'll need a set of calipers...

http://www.thirdgen.org/techboard/lt...t-numbers.html

TXZ28LS1

iTrader: (5)

I am running an old MTI cam as well. I have comp 918 springs if that is what your asking. I believe any cam under .600 lift this is the spring they used.

Mazzenger

iTrader: (5)

They also used Manley springs.

PREDATOR-Z

I use to run that cam with 918s, Pac 1518 or PSI will do as well. It is a XER Compcam lobes.
224/220 ,581/.581 116LSA