Blk98Vert

iTrader: (2)

There are 2 different part numbers, which one is right?

gMAG

iTrader: (1)

What vehicle is this for?

gMAG

iTrader: (1)

Ok, after checking this out @ AutoZone.com, the Bosch 13111 is a post-cat sensor with a 50.44" harness.
Of the 2 Denso 'equivalents', the 234-4617, & the 234-4000...the 234-4617 has a 44" harness, & the 234-4000 has an 11" harness.
A 2003 Z06 was used an the example.

omarrakeen

iTrader: (2)

if you are running those with long tubes and you already have extensions, you could buy the short ones and save some bucks..i just received my 234-4025 today they should be the same as the oem..they look awesome

dutinsss

iTrader: (2)

so just to get it straight, the Denso 234-4617 will fit f-body's with long tubes and no 02 extensions? just like the bosch 13111?

Rare96LT1Formula

iTrader: (32)

Denso 234-4025 - I believe these are universal fit

Depending on which headers you run, you MAY need extensions. I ordered these recently from Rock Auto at the advice of LS6427 (I'm sure he'll probably chime in here) and have been running them ever since. These are QUALITY 02 sensors guys. Very nice product and only around $35!

vatechguy3

iTrader: (4)

bump back up.
so which is the correct denso part number for an ls1 camaro with ARH LTs? Looking to replace bad O2s and if i can eliminate my O2 extensions, so much the better.

tony

99Bluz28

iTrader: (35)

A big YES !