Whinning at 70
#1
Staging Lane
Thread Starter
Join Date: Jun 2008
Location: Ft. Rucker AL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Whinning at 70
Ok I feel like an idiot for asking this, but how much noise is to be expected with a set of 4:10 motive gears. Mine whine pretty good at 70 MPH but I have not really driven at that speed sense installing them until recently. Driving around town they are quite and it drives fine. I am wondering if I need to take it apart and take a look at my wear pattern and backlash. I have seen where some people have said that Motive's are noisy and other people say your gears shouldnt make noise.
#4
Staging Lane
Thread Starter
Join Date: Jun 2008
Location: Ft. Rucker AL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
I did the install with a friend who has done a few of them. The pattern looked pretty good it was centered in both directions. I wish I had a picture. At first it whined a little at slower speeds but as I have driven it some it has went away the speeds I typically drive. I just took it on a road trip for the first time and noticed that it was doing it at higher speeds though.
#5
On The Tree
Join Date: Mar 2011
Location: Tinley Park IL
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
My friend has motive 4:10's in his pro-charged v6 mustang. He said it wines a lot at highway speeds too. When he drove me in it just around our schools parking lot I could hear a slight wine when he took off but it went away quick.
#6
Staging Lane
Thread Starter
Join Date: Jun 2008
Location: Ft. Rucker AL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Yeah mine only does it at higher speeds now. I don't know if it is becaus I haven't put many miles on it at that speed ot not. I would think they would be pretty well broken in by now. knowbody has mantioned hearing it when they ride with me. Perhaps I'm just paranoid. I tend to get that way about noises in my car.
#7
make your exhaust louder.... haha if they are whining cause they are messed up its to late to do anything about it, they are ruined. they are probably fine and your just not used to hearing any thing. ive had 3 different sets in my car and all have made a little noise(brands and ratios)
Trending Topics
#8
11 Second Club
iTrader: (13)
If pinion depth is set properly you shouldn't have any whine, regardless of what gear set ratio or manufacturer you have. Just because the pattern was centered that doesn't necessarily mean it as correct. You have to look at the overall shape of the pattern, not just the location on the tooth. What is your backlash set to?