Vehicle Classifieds - 98 Z28 408 Stroker

1998 Camaro Z28 black exterior, black leather seats, power everything, keyless entry, 12 disc cd changer, chrome zr1 wheels
This car is built sounds amazing and run very very strong. Motor has less than 100 miles. I have been building this car for two years and and found a piece of property I am interested in so the car must go. I have receipts for all engine parts that total over 8,000. I have idle clips and pics I can send from my phone. No trades. Figure i would cut the BS and give my bottom dollar 9,000 FIRM My loss is your gain.

Call or text (304) 437- four four four nine Cody. Car is located in elkview, wv



Motor specs:
408 cubic inch
6.0 LQ4 block .030 over
Callies Compstar 4" forged crank
Callies h beams forged
Wiseco -3cc pistons 2618 forged
Balanced bottoms end
Clevite 77 bearings
arp rod bolts
Arp main and head studs
Melling hp oil pump
Ls3 head gaskets
Ls3 821 heads 2.16 intake valve
PAC 1518 valve springs
Texas speed 7.425 chromo pushrods
Ls7 lifters
Comp custom grind cam speced by Pat G 239/247 .624/.624 113 LSA+2
Ls3 intake and fuel rail
42lb injectors
90mm Nick Williams Throttle Body
Texas Speed 1 7/8 headers
Texas Speed 3" off road y pipe
Slp loudmouth exhaust
Truck 85mm mass air flow
Slp throttle cable bracket
New flex plate and harmonic balancer

Trans:
4l60e
3500 stall
B&m stage 2 shift kit
Alto eagle clutches

Rear:
3.73 gears
Auburn locker

Other:
Prothane Poly Motor Mounts
Walboro 255

what numbers did the car make at the wheels??

http://sphotos.xx.fbcdn.net/hphotos-ash3/s320x320/525854_464391796922767_354337133_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/s320x320/246575_464373513591262_508669553_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc7/s320x320/575732_464373876924559_472336896_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash3/s320x320/598682_464373970257883_846351771_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/292578_464373713591242_454074419_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc6/249185_464373670257913_1082033604_n.jpg

To the top

ttt........

bump again, aslo nterested in what this bored 6.0 made at the wheels

bump again, aslo nterested in what this bored 6.0 made at the wheels

never been on the dyno. I have some e-mails that Pat G sent me from when i speced the cam and he said im in the 525-550 range. There isn't a dyno in WV and its hard to find the time to take it out of state for a dyno pull. I know bluecat is fairly close to me in kentucky but he is always busy

So is this a mail order tune then?

So is this a mail order tune then?

It was. My buddy and I dialed in the afr from what blue at had it at. My buddy has tuned a bunch of trucks. It might need some touching up from a good tuner.

To the top

no one interested in a cobra eater?

I know you said no trades. But i figured i would I'd throw it out there I have a 06 Gsxr 1000 and 3k cash. The bike is worth 6k all day.

bunch of tire kickers.....to the top

Lookin at potential trades....

bump....

bump..

Was it tuned? Car in sig?

Nix

Was it tuned? Car in sig?

Nix
Yes it's been tuned by me and a buddy.

Wow, I figured someone would have jumped on this thing. A 408 powered car for the cost of building a motor.

Sorry, should have said trade for car in sig lol

Nix

Sorry, should have said trade for car in sig lol

Nix

oh, sry i misunderstood. i will keep the trade offer in mind, i am looking for something someone could possibly throw some cash in along with a trade in.

Bump...

Sold..