Year: 1996
Make: Chevrolet
Model: Camaro
Price: $4500
Mileage: 152000
Private or Dealer Listing: Private Listing
Location (State): IL
Color: Red
LS Engine?: Car has LS engine
Selling my 96 RS project due to lack of interest anymore. I have all the stock parts for the car minus the front bumper and hood. I also have the most recent front end for the car including fenders, bumper, and headlights. No hood as I was planning on an aftermarket fiberglass replacement. The car has a fully tig welded chrome moly cage good to 8.50's that will still accept full factory interior. Easily upgradable to 25.5. It has fully welded Bmr sub frame connectors. The main hoop goes through the floor and is welded to the sub frame connectors. It has a dash bar with extention to tie it into the firewall. It has rocker bars. It has bars that extend from the rear bars and go through the back deck and become the upper spring mounts for the rear end. It also has been mini tubbed, only the kit was extended for height. I was not happy with how high the car would have to sit. So we extended the height to be able to lower the car as much as possible. It can fit a 29.5/10.5 15 easily or mock up was done with a 295/65R15 Mickey Thompson Street Radial which is 12.5 wide and 30 tall. The mini tubs were also done so the rear seat can still be installed in the car. I also installed a cross bar behind the rear seat for harnesses if you choose to have rear passengers. The upper part of the fire wall has been pushed back to clear all motor types. I have a Bmr Turbo K-member and lower control arms to go with the car. Way to many hours went into this project to describe every detail. im sure i missed some. If you have any questions or questions on how things were done, please feel free to ask. Im looking for $4500 O.B.O. I would prefer cash but would consider trades. Thanks.
This is the link to the pics of the work done to the car.
https://ls1tech.com/forums/album.php?albumid=8136