Can I achieve 800 RWHP with front mount & D-1?
#1
Can I achieve 800 RWHP with front mount & D-1?
I've been going back and forth with getting a front mount. Everyone tells me my 4.5 intercoolers will choke my engine and will probably yield me around 650 rwhp. With the engine I have (AES 390/220 trick fllow heads/Similar Brute Speed cam) and Alky contol (6 speed) I'm hoping to get 800 rwhp if I go front mount. I have a 3.4 pulley which will spin my D-1 at max impellar speed... What does everyone think? Let me know what RWHP everyone has seen with this type of setup.
#2
The guy I bought my kit from was making 720 with the 3.4 pulley and meth on a forged 347 and stock 317 truck heads. He had the stock J bracket so im quite confident there was some belt slipping going on. I think 800 is possible.
#7
LS1Tech Sponsor
iTrader: (16)
I've seen 740 rwhp with a much milder camshaft and Patriot Stage 2 heads on a 347 with 9.5/1 compression, with a D-1SC at 16 psi. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
Trending Topics
#8
Thanks Bob I'm just making sure I can get their with the stuff I have now. Got to pay off some bills, then I'll be calling you for my front mount and race valve.. As far as the compression well I'm right around 9.5-1 so I guess I'll have to wait and see..
Last edited by Tirefire; 07-05-2012 at 08:08 AM.