Uncle_tom79

Category: Engine - Complete Motors
Price: $3600
Location (State): OK
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine

Fresh build Iron block 408
Callies Dragonslayer Crank, .010 on the rods, std mains
Callies Compstar Rods, new with ARP 2000 bolts
Mahle Flat top Pistons, new with coated skirts
Bored, honed, decked and align honed with plates. Rotating assembly balanced. No cam or oil pump. $3600

Will deliver up to 100 miles form 73501 or crate and drop off at the freight terminal for free.

TZ2884

iTrader: (14)

Good deal. GLWS

silver02Z

iTrader: (19)

I'd be interested in the heads, Local as well..

Br1_ss

iTrader: (11)

if only there's deals like this in Cali

lemons12

iTrader: (71)

Who built motor? Receipts?

Compression with the l92 heads?

Uncle_tom79

CR will be around 11.3-1 with the heads listed. The machine work and assembly were performed by Penrod Racing Service. The parts were purchased from various online classifieds, so no receipts.

Uncle_tom79

Freight truck can bring this deal to your front door

Uncle_tom79

More pics are up.

Uncle_tom79

Keeping heads for another project.

Uncle_tom79

Price reduced to $3600

Z06Ron

iTrader: (2)

What cc for the heads and head gasket thickness was used to figure the 11.3 compression?

Uncle_tom79

68cc chamber, .041 gasket. It's 4.030 x 4.00, zero deck, 4cc valve reliefs.

Uncle_tom79

Callies crank and rods for eagle/scat/ohio crank prices. Dragonslayer cranks are a huge step up from the cheap offshore stuff.

WeDragBody

Rings gapped for nitrous? If so whats it set up to handle

Uncle_tom79

Gaps were set up at .024 per Mahle recommendation. This is good for up to a 150 shot. They should be opened up to .032 if using more nitrous.

Uncle_tom79

Still for sale

work in progress

iTrader: (2)

pm'd you

Uncle_tom79

Didn't get it.

Uncle_tom79

Back to the top.