Whos running a Huron Speed kit?
#1
TECH Fanatic
Thread Starter
iTrader: (17)
Join Date: May 2006
Location: Chicago IL
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
Whos running a Huron Speed kit?
Who all is running the Huron Speed kit how do you like it what turbo are you running and what kinda power and 1/4 times are you putting down.
#2
TECH Apprentice
iTrader: (1)
I'm running it and love it. It was very easy to install and the quality of the parts and customer service are top notch.
I do my own tuning so I don't have any dyno numbers but the power will really depend on the engine/turbo combination anyways. This kit will support the same amount of power any other truck manifold kit will.
I'm only at 6psi until I get new gears and an electronic boost controller but here's a video of my car...I can't wait to crank it up to 12 psi!
I do my own tuning so I don't have any dyno numbers but the power will really depend on the engine/turbo combination anyways. This kit will support the same amount of power any other truck manifold kit will.
I'm only at 6psi until I get new gears and an electronic boost controller but here's a video of my car...I can't wait to crank it up to 12 psi!
#3
TECH Fanatic
iTrader: (4)
Join Date: Apr 2005
Location: Shelby twp, MI
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
Another one here.
Kit fits great. Haven't had to modify anything at all. It just bolts right up.
No power numbers or anything yet as I'm still working on the supporting mods for the car(Fuel system, ect)
They are semi-local to me and have amazing customer service too!
Kit fits great. Haven't had to modify anything at all. It just bolts right up.
No power numbers or anything yet as I'm still working on the supporting mods for the car(Fuel system, ect)
They are semi-local to me and have amazing customer service too!
#4
I'm running it and love it. It was very easy to install and the quality of the parts and customer service are top notch.
I do my own tuning so I don't have any dyno numbers but the power will really depend on the engine/turbo combination anyways. This kit will support the same amount of power any other truck manifold kit will.
I'm only at 6psi until I get new gears and an electronic boost controller but here's a video of my car...I can't wait to crank it up to 12 psi!
I do my own tuning so I don't have any dyno numbers but the power will really depend on the engine/turbo combination anyways. This kit will support the same amount of power any other truck manifold kit will.
I'm only at 6psi until I get new gears and an electronic boost controller but here's a video of my car...I can't wait to crank it up to 12 psi!
Thanks for the kind words guys! customer service is our #1 priority.
to the O.P. if you have any questions about the kit please feel free to PM me. i will do my best to answer them as fast as i can (i check the site multiple times a day)
as far as power, as mentioned this kit will support the same amount of power as any truck manifold kit. numbers will vary with turbo, engine combination, drivetrain, elevation, tune, fuel, and the list goes on.
__________________
YOUR SOURCE FOR ALL THINGS TURBO!
CASEY@HURONSPEED.COM
Check us out on Facebook at: www.facebook.com/HuronSpeed
TWITTER @HURONSPEED
YOUR SOURCE FOR ALL THINGS TURBO!
CASEY@HURONSPEED.COM
Check us out on Facebook at: www.facebook.com/HuronSpeed
TWITTER @HURONSPEED
#5
__________________
YOUR SOURCE FOR ALL THINGS TURBO!
CASEY@HURONSPEED.COM
Check us out on Facebook at: www.facebook.com/HuronSpeed
TWITTER @HURONSPEED
YOUR SOURCE FOR ALL THINGS TURBO!
CASEY@HURONSPEED.COM
Check us out on Facebook at: www.facebook.com/HuronSpeed
TWITTER @HURONSPEED
#6
TECH Fanatic
Thread Starter
iTrader: (17)
Join Date: May 2006
Location: Chicago IL
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
Ok sounds like this will be the kit I order I just wanted to make sure the kit could handle a good amount of power,I will be running a forged 6.0 I have a good fuel system juat not sure if I wanna stick with c16 or go to e85 and im not sure on a turbo im thinking the PT76 Billet wheel.
#7
Ok sounds like this will be the kit I order I just wanted to make sure the kit could handle a good amount of power,I will be running a forged 6.0 I have a good fuel system juat not sure if I wanna stick with c16 or go to e85 and im not sure on a turbo im thinking the PT76 Billet wheel.
Casey
__________________
YOUR SOURCE FOR ALL THINGS TURBO!
CASEY@HURONSPEED.COM
Check us out on Facebook at: www.facebook.com/HuronSpeed
TWITTER @HURONSPEED
YOUR SOURCE FOR ALL THINGS TURBO!
CASEY@HURONSPEED.COM
Check us out on Facebook at: www.facebook.com/HuronSpeed
TWITTER @HURONSPEED
Trending Topics
#10
On The Tree
iTrader: (11)
Join Date: Aug 2009
Location: Ca
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
I got a turbo from HS. The kit is nice. Im just waiting for my motor LOL. Also I haven't decided for what cam to go with either so im stuck on that part haha. Quick question what heads are you guys running with this setup? I have some 317's that I might get ported
#11
i have ported 317's on my personal car. no numbers yet, but people are having success with them.
__________________
YOUR SOURCE FOR ALL THINGS TURBO!
CASEY@HURONSPEED.COM
Check us out on Facebook at: www.facebook.com/HuronSpeed
TWITTER @HURONSPEED
YOUR SOURCE FOR ALL THINGS TURBO!
CASEY@HURONSPEED.COM
Check us out on Facebook at: www.facebook.com/HuronSpeed
TWITTER @HURONSPEED