LQ4 Piston
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
LQ4 Piston
Broke #7, need a new one. Looking for a stock replacement to get it going again. Its a 05 block so full floating wrist pin, dished top with no valve reliefs. What ya got? If you have something, pics would be greatly appreciated!
#2
Staging Lane
iTrader: (76)
Join Date: Aug 2010
Location: las vegas
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
I have the set of pistons and rods (floating) from a 05' LQ4 with 35k miles on them
along with a complete set of 317 cyl. heads that I was going to post soon
I can take and post / email pics if you'd like
Thanks, Jeff
along with a complete set of 317 cyl. heads that I was going to post soon
I can take and post / email pics if you'd like
Thanks, Jeff
#4
Staging Lane
iTrader: (76)
Join Date: Aug 2010
Location: las vegas
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
please let me know if you need additional or have any questions
You can see by the bearings and side skirts that this was a low mileage engine
If you are wondering "why it is apart then"?
I bought the whole engine from a guy that pulled it apart to do a forged stroker setup, but he lost his job and it never happened
I am building the block with different internals
thanks, Jeff
#5
Teching In
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Here are the pics
please let me know if you need additional or have any questions
You can see by the bearings and side skirts that this was a low mileage engine
If you are wondering "why it is apart then"?
I bought the whole engine from a guy that pulled it apart to do a forged stroker setup, but he lost his job and it never happened
I am building the block with different internals
thanks, Jeff
please let me know if you need additional or have any questions
You can see by the bearings and side skirts that this was a low mileage engine
If you are wondering "why it is apart then"?
I bought the whole engine from a guy that pulled it apart to do a forged stroker setup, but he lost his job and it never happened
I am building the block with different internals
thanks, Jeff