PRAY HRD

iTrader: (119)

Category: Accessories
Price: $250
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): IL
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

Hey guys, just got a deal on some 160# injectors so i'm making the switch to E85 and will be switching to a large external pump. These literally only have 1 start up on them due to my computer not working for a reason i'm unsure of but the car started and ran with a friends computer and it was shut off right after about 30 seconds. These were purchased new through Show-Me-Speed and can be verified through their records if need be i'm sure. Pictures speak for themselves. All fittings included and is ready to drop in and go! Does not include bucket hold down ring, just reuse your own.

Save yourself some trouble if you're doing this mod as it's a nice pain in the dick! lol I can do $275 shipped on the whole deal or $250 shipped and your bucket complete with sending unit & float for LS equipped '98-'02 F-body in exchange, saving some work gutting it out. Unit MUST be in good working condition for exchange!!
Can also let just the dual pump assembly with the fittings go for $225. PENDING SALE to 01 SOM.....

Same deal with the injectors. They have a couple starts and about 30 seconds of run time on them. Purchased through Lashway. 83# Siemen Deka FIC flow matched. Direct LS1/6 EV1/Uscar plug ins. NO adapter needed. First $325 shipped takes them away! SOLD!!!
http://fuelinjectorconnection.com/sh...hp?productid=9

Add 3% for paypal fee. Prices are set Firm. Thanks and buy with confidence!

Thanks for looking. I'm only on here in the evenings but will have a friend check on it and update. paypal will go to him. His user name is 9sec93


$225 shipped as shown in the pic immediately below, plus installed socks...

No longer has the sensor on top and is filled but can easily be opened up again if you wanted to use it.

You will need to make a small dimple in your panel to make room for the very slightly raised -8 elbow. Very minute detail but being totally up front so no surprises.


HAS SINCE HAD A SLIT PLACED IN THE SIDE FOR THE SOCKS TO STICK OUT AS I WASN'T COMFORTABLE THAT THEY MAY GET FUEL STARVED...

caddy03pimpin

iTrader: (18)

Damn I need to sell my 60lbs injectors so I can buy yours !!!

mg98ta

iTrader: (20)

I have a metal 98 model tank. My assembly doesn't have a plastic bucket around it like that. Will it work with my tank? If so, i'll take it.

ardenq

iTrader: (1)

I'll take the pumps and injectors. What's your friends paypal?

robsquikz28

iTrader: (246)

o **** lol

what ya gonna run now?

you can always send the money my way to u know?

PRAY HRD

iTrader: (119)

injectors were actually bought by said friend this morning bud. i'm trying to get ahold of him now for paypal info. never thought to ask him for it earlier. just so i know, are you wanting the whole setup or just the pumps & fittings?

PRAY HRD

iTrader: (119)

ok got his pp info and pm'ing it to you now.

PRAY HRD

iTrader: (119)

If ardenq decides not to take the pumps, you can use those but not the bucket itself. basically you take a large worm clamp and put it around the metal framework of your drop in usit to keep it in place.

01_SOM

iTrader: (2)

Ill buy the dual pump set up asap

mg98ta

iTrader: (20)

It already has a worm clamp on it in the pics. re you talking about a clamp around the pumps and my unit that houses the pump & fuel lever unit?

PRAY HRD

iTrader: (119)

yes that's correct mg98ta.

i'll pm you 01 som