lower tubular a-arm HELP!!!!!
#1
Teching In
Thread Starter
iTrader: (5)
Join Date: Jan 2006
Location: charlotte nc
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
lower tubular a-arm HELP!!!!!
Purchased a whole kit k-member,upper and lower a-arms from member. not sure what brand (sorry). well i was mounting the spindle and the OE crown nut for lower a-arm ball joint would not go on. so i seen it needed to be fine thread instead coarse. napa gave me a fine thread m-14 nut but it only goes half way and wont go any futher .....what nut is suppost to go on there... thanks guys
#2
LS1Tech Premium Sponsor
iTrader: (40)
Purchased a whole kit k-member,upper and lower a-arms from member. not sure what brand (sorry). well i was mounting the spindle and the OE crown nut for lower a-arm ball joint would not go on. so i seen it needed to be fine thread instead coarse. napa gave me a fine thread m-14 nut but it only goes half way and wont go any futher .....what nut is suppost to go on there... thanks guys
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!