need some help (new ls1 owner)
#1
Staging Lane
Thread Starter
Join Date: Jun 2012
Location: Fayetteville NC
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
need some help (new ls1 owner)
a friend of a friend who is pcsing offered me his 98 camaro for $2500 ofcourse i jump on it he didnt kno much about it other than it was fast! so i check it out inside is spotless clean as hell he said when he got it they put a 02 ws6 engine in it with 20k he says its at 29k now i open the hood and see corvette overs?? and some wierd looking switch?? it sounds like it is a ****** monster looks like long tube pace setters cuz they go all the way down then turn into a 4 2 1 its h piped and pulls hard as hell has a 2400 stall in it then i discovered a tciauto sticker on the back glass? looked it up they do hi performance tranys im lookin to see if yall can tell me more about it just by looking at a few pics and what this lil box is thx
#7
Staging Lane
Thread Starter
Join Date: Jun 2012
Location: Fayetteville NC
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
lol yes its dirty its funny cuz if u see the inside its like the total opposite! but ima try a new vss first and see if thats the case...and ill clean the engine!
Trending Topics
#8
Staging Lane
Thread Starter
Join Date: Jun 2012
Location: Fayetteville NC
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
ok so i picked up a new vss got home and jacked it up and the vss was barely in the damn hole!!! and the bolt was only 3 turns in! put in the new 1 and voila car pulls like a damn beast and shifts hard to break loose in 2-3-4
#9
Staging Lane
Thread Starter
Join Date: Jun 2012
Location: Fayetteville NC
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
so i cleaned the engine bay and saw the guy in my neighborhood with a z28 and asked him if he would check out my car he says i have a ls6 motor with mid tubes borla exhaust he thinks the stall is higher than the 2400 i said..its been lowered 2'' has traction bars he was saying i got a really great deal he took it for a drive and estimated 370-380 hp guess ill be sending my pcm to frost to get ready for nitrous..tr6 install is guna be a bi**h