Full CNC Top End Kit for Sale on Ebay...Legit or Knockoff? Help
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Full CNC Top End Kit for Sale on Ebay...Legit or Knockoff? Help
So i've been browsing around for a heads package for my LS1 and stumbled upon this huge package on ebay with what looks like to be a good full top end package but no real brand names.
Looking for input and thoughts on what you guys think and maybe even personal experiences. I am aware it might be a stupid question and I apologize in advance.
Here is the Ebay link:
http://www.ebay.com/itm/LS1-LS6-TOP-...723ad8&vxp=mtr
Thank you for any replies.
Looking for input and thoughts on what you guys think and maybe even personal experiences. I am aware it might be a stupid question and I apologize in advance.
Here is the Ebay link:
http://www.ebay.com/itm/LS1-LS6-TOP-...723ad8&vxp=mtr
Thank you for any replies.
#6
I think you really just comparing to what others sell their heads for.
Also consider, there is a business practice which people sell stuff at super low cheap prices, sometimes below the cost of making it. This practice is to steal business away from competitors forcing them to crumble.
I don't like to pre-mature bash a product because the of the price tag. Just because its not marked up 75% doesnt mean its junk.
Looks like the parts are located in the US too...so they could easily be returned.
#7
11 Second Club
iTrader: (1)
Price out versions of those components you know to be quality pieces and then when this is half the cost maybe it will raise an eyebrow as to how quality pieces could be made so cheaply.
I am no metal worker but the phrase "Gravity Die Cast" sounds like how I used to make jigheads and sinkers as a kid. Molten pot of lead a hinged mold, close mold put it under the pot, open the valve and let gravity feed lead into the mold, could endup with wrinkles and pockets and all sorts of flaws not really important in a piece of fishing tackle, but I would think the method for casting QUALITY heads would be a little more involved to avoid porosity and such. Sounds to me like they threw something out there hoping most people are too ignorant to understand what it means but are willing to trust it is good.
I am no metal worker but the phrase "Gravity Die Cast" sounds like how I used to make jigheads and sinkers as a kid. Molten pot of lead a hinged mold, close mold put it under the pot, open the valve and let gravity feed lead into the mold, could endup with wrinkles and pockets and all sorts of flaws not really important in a piece of fishing tackle, but I would think the method for casting QUALITY heads would be a little more involved to avoid porosity and such. Sounds to me like they threw something out there hoping most people are too ignorant to understand what it means but are willing to trust it is good.
Trending Topics
#8
Price out versions of those components you know to be quality pieces and then when this is half the cost maybe it will raise an eyebrow as to how quality pieces could be made so cheaply.
I am no metal worker but the phrase "Gravity Die Cast" sounds like how I used to make jigheads and sinkers as a kid. Molten pot of lead a hinged mold, close mold put it under the pot, open the valve and let gravity feed lead into the mold, could endup with wrinkles and pockets and all sorts of flaws not really important in a piece of fishing tackle, but I would think the method for casting QUALITY heads would be a little more involved to avoid porosity and such. Sounds to me like they threw something out there hoping most people are too ignorant to understand what it means but are willing to trust it is good.
I am no metal worker but the phrase "Gravity Die Cast" sounds like how I used to make jigheads and sinkers as a kid. Molten pot of lead a hinged mold, close mold put it under the pot, open the valve and let gravity feed lead into the mold, could endup with wrinkles and pockets and all sorts of flaws not really important in a piece of fishing tackle, but I would think the method for casting QUALITY heads would be a little more involved to avoid porosity and such. Sounds to me like they threw something out there hoping most people are too ignorant to understand what it means but are willing to trust it is good.
I agree, but people sometimes get caught up in the more expensive, the better which isn't always true. You have to consider and wonder...who else is selling these same parts re-badged but for more money.
Do you think Comp Cams is casting their own throttle bodies? How about the half dozen cylinder heads people? No they are not, They out source it.
People get a hold of these programs, designs, molds and get someone oversea to make them cheaper direct. No Pun intended, but ask "XXX" who cast their house brand heads. They wont tell you....fishy aint it?
I can't say something is crap until I actually see it.
Ebay is harsh on sellers. Since he is in California AND has thousands of feedback, I think your money is safe if the quality is bad.
One last point...are you worried about performance or appeal? Some products may not visually look "perfect", but they perform and are reliable.
I have used water pumps, intakes, throttle bodies, and distributesr from the "sketchy" deals, but they seem to have worked out for me.
#9
If you guys zoom in on the throttle body, the label says it's a Procomp Motorsports throttle body.
http://www.jegs.com/v/Procomp-Electronics/746
Never heard of the brand though....
http://www.jegs.com/v/Procomp-Electronics/746
Never heard of the brand though....
#10
If you guys zoom in on the throttle body, the label says it's a Procomp Motorsports throttle body.
http://www.jegs.com/v/Procomp-Electronics/746
Never heard of the brand though....
http://www.jegs.com/v/Procomp-Electronics/746
Never heard of the brand though....
I have used their aluminum water pump. Good product.
#11
11 Second Club
iTrader: (1)
I am kind of a middle to upper end buyer. You get into "top end" names and you are paying for name and marketing and a LOT of magazine ads.
On the other end you buy rock bottom price stuff and it is rock bottom price for a reason.
You are also right that there are a lot of brands and few actual manufacturers.
I don't trust a lot of ebay feedback, the feedback period is too short and for the most part people who buy something like this on ebay aren't going to know the difference between good and bad parts.
I have known guys who loved parts they bought till they saw something else and then took a closer look at what they loved first and realized it was JUNK. A friend had heads/intake done by a very popular vendor on this forum and was happy till he took it apart for a leak or something and tried to clean things up and the intake was ported paper thin and as soon as he tried to clean it he was punching holes which made him look even closer and all the shoddy workman ship was then visible to him.
Lesson being a lot of people are happy with what they have just because they don't know any better.