1956F100

iTrader: (1)

I just purchased a used set of C6 Z06 front calipers.
Where can I buy good brackets and brake lines to mount calipers.
New to the LS1 cars but loving the performance of them.

UGotBeaT

kore3 makes brackets and has.brake lines.available for the fronts. they make a kit for the rear as well. i have both front and back kits.

redbird555

iTrader: (14)

Just make sure you have at least 18" wheels the c6 z06 calipers with the rotors stick out 7.9" from the center of the hub which makes them difficult to fit on even some 18" wheels. you will also need the c6 brake brackets and lines like said

1956F100

iTrader: (1)

Thanks for tips I have 18 and 19 z06 wheels I will look into Kore 3 brackets.
I'm still searching for rear C6 z06 calipers, let me know if you know anybody selling just the rear.

UGotBeaT

the brackets for the rear are not listed on there site you will have to call them. they have an option with the use of the e brake or without.

94LT1TA6spd

You can get everything needed start to finish from Kore3. They have great customer service as well. I spent like half an hour on the phone with them today, and they were very very helpful and knew our application inside and out. They will definitely be getting some off my money next week!

djfury05

iTrader: (30)

Post some pics of your setup installed please if you have any.

UGotBeaT

sorry forthe big pix

TA_Moscow

iTrader: (4)

Bad *** look! Awesome!

spy2520

iTrader: (3)

I dont see the rear brackets for f-bodies on the kore3 site, are one of the 10-bolt brackets correct for our setup?

djfury05

iTrader: (30)

Read post #5..

spy2520

iTrader: (3)

edit: whoa double post

spy2520

iTrader: (3)

damn i dunno how i missed that.....

Fosnot

iTrader: (15)

will that work with an 07 CTSv caliper instead? or is it 09...?

spy2520

iTrader: (3)

I think the 07 V calipers are direct fit without brackets.

Fosnot

iTrader: (15)

My bad, I meant for the rears.... The rears will fit in a 17" wheel as well, right?

I already have them on the front, would like to finish it off.

Fosnot

iTrader: (15)

spy2520

iTrader: (3)

I'd like to know the same thing. I'd like to know the options we have on rears like 13" rotors and 14", what calipers. Seems like not alot of info out on it yet.