ThatChevyDude

Whats up guys this my first 6.o. I need your guys input on my combo. I bought a vic jr carb intake and a 750 proform carb, msd -6010. Didnt buy the 2215 yet waiting for some input. i might install the motor in my 70 camaro, it has 342 gears, 3500 stall and weighs 3270 with me in it. I want a torquey motor, i know i shoulda went with the rpm intake but i wanna spray 150 to 200 shot later. Need help. ..i wanna go fast like zones fox body.

ZONES89RS

iTrader: (25)

Well, im running 7.2s and should be way faster because of my tight converter. That combination would work very well and pull to 6500 RPM. Will be well mannered on the streets and if you dont want the radical idle, it may be the cam for you. A set of 1.8 rockers would give it a touch more edge in the lift department and a bit more duration.

ThatChevyDude

Thanks zone..i do want a well mannered street car, i drive my car almost every day. It has a stock 5.3 in it now but now i want a little more torque and a racy idle. Will this motor make at least 400hp?

jleews6

iTrader: (2)

A 6.0 with that intake and carb and a mild cam will make 400 by accident.

ZONES89RS

iTrader: (25)

I'd expect 430 hp or so.

trjk07

you guys have any input on a lq4 with ported a polished 5.7 heads and a stock 5.7 cam.can this be tuned myself with a laptop?

newschool72

iTrader: (12)

If its a carbed engine and you are using the MSD to run your coils, you can tune the ignition with a laptop.

trjk07

i stayed with ls1 injection.its very strong but im sure this computer wants to know i added cubes.plus my trans is freakin out

newschool72

iTrader: (12)

Im sure tuning would help pull a few more HP out of it. To tune it you will need HP tuners and although some of the members on this forum would know how to help, one of the other forums that are more in line with your setup would help more.

Sorry about the hijak, OP. Back to the Eddy 2215.

trjk07

appreciate ya