MR2liter

iTrader: (11)

I finally had some time to strap my car to the dyno and see what she does. I was quite surprised. This is at 14psi with 13 deg of timing. The heads have never been off this 02 motor. The only motor mods are 234/244 cam, tooley titanium duals, trunions, pushrods, and a timing chain.



Still need to do some tuning as you can see its very fat up top.

Blackpanther99

iTrader: (8)

Thats impressive. Planning on swapping out that 10 bolt? Lol

MR2liter

iTrader: (11)

Thanks, and yes eventually I will. For now though ive got a few 10 bolts laying around ill swap in once this one lets go.

95bowtie

I really need to get my car to the dyno. I'm runnin 14 lbs too but on a 78mm turbo...all I know is its making more than the 600whp it made last year on 10lbs. It spins drag radials at 60mph in 3rd gear.

SSickLS1SS

i wouldnt really put this under the category of "cam only" lol

I8UR4RD

iTrader: (16)

^^^^^^

Blackpanther99

iTrader: (8)

Nice! Making any track passes soon?

MillsMotorvation

These engines loves a good camshaft! Great numbers!

Blackpanther99

iTrader: (8)

MR2liter

iTrader: (11)

Youre right. I changed the title.

MR2liter

iTrader: (11)

I dont think I will until the new motor and 12bolt go in.

autogeek23

iTrader: (13)

very nice. but its a ticking time bomb

MR2liter

iTrader: (11)

Yes I agree. Im building a high compression iron 403 for it currently.

Blackpanther99

iTrader: (8)

When you plan on swapping it in?

MillsMotorvation

Still it is putting out some power for 14psi! Must have a good topend setup, heads intake ....ect

MR2liter

iTrader: (11)

It has stock 241 heads with an ls6 intake. Still running through twin 3.5 coolers aswell.

MR2liter

iTrader: (11)

Its a few months away. Still need to get trick flow 255s and a few other things.

Blackpanther99

iTrader: (8)

Keep us updated!

MR2liter

iTrader: (11)

Here is a motor shot.

oChristiano

iTrader: (6)

What valve covers/coils are those?