jc98ss

iTrader: (13)

i'm about to pull the trigger on a stock length Dana S60, so i figure i might as well grab a set of wheels too......i like the polished Street Lites, but don't know anywhere other than Summit that carries them.....what offsets do i need?.....i like them to tuck in, not stick out......i'm currently running the stock 17x9 ZR1's up front and 17x11 OE ZR1's with 50mm offset in the rear (which is closer to 8" offset instead of the commonly recommended 7.5" backspace)......i'd like to new wheels to fit as close to these as possible.

jc98ss

iTrader: (13)

up top

PrettyBird

Call Midwest Chassis. I got a great price on mine and great service. Number is on their site

jc98ss

iTrader: (13)

what offset would i need for the fronts?.....my stockers are 17x9 +56mm, so what would 17x7's need to be to fit like these?

jlrz28

iTrader: (7)

Purchased from Summit, I used 4.5 backspacing on 17 x 7

Rise of the Phoenix

iTrader: (27)

Jeggs is where I found the best deal. They price-match too.

ssvert99

iTrader: (26)

Please support the vendors who pay to keep this site alive.

I can beat the big mail-order guys prices and have the correct dimensions for your wheel packages. Give me a call and I will get you setup!

CamaroFreak

looking for a price on the same set up

JakeFusion

iTrader: (7)

Rear offset should be 7.8" in a 17x11. That's ideal.

Btw, Summit is a vendor here. Not trying to be a smartass, but they do support the forum to some level.

FASTFATBOY

iTrader: (23)

There is a set in the classifieds right now.

WheelsUp84z

iTrader: (14)

If you're about to buy a new rear, I have a newset with tires (0 miles on both) for much less than new you would have to narrow the rear 2.75" per side for them to fit. Lmk if you're interested

WheelsUp84z

iTrader: (14)

BOBS99SS

iTrader: (2)

That car lowered would look killer