oakley6575

iTrader: (3)

Category: Engine - Intake/Fuel
Price: $650
Part Fits: 2010+ Camaro, Corvette, 04+ Cadillac CTS-V
Location (State): NV
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

I have a set of stock untouched LS3 heads (Casting #821) and LS3 intake manifold. They both have less than 8,000 miles on them and were taken off today. I'm selling them because I'm stepping up to the TFS LS3 heads. The heads have the PRC .650" double spring kit on them that includes the ti retainers. The heads have the hollow stem intake valves that weigh in at 88g. The intake manifold comes with manifold bolts and gaskets. I also have zero mile LS3 valves springs if some one wants them. Let me know if there are any questions


LS3 Heads Assembled - $650
LS3 Manifold - $175
Stock LS3 valve springs - $50

mikh338

iTrader: (16)

what would I need to set these up on my 370. currently I have 241 heads on it which blow. what rockers would I need etc...

oakley6575

iTrader: (3)

You would need the heads, intake, rocker arms, and probably different pushrods. You could just buy my entire top end and swap it on.

I have the pushrods and rocker arms for sale as well.

Lazered98

iTrader: (4)

How much for the rockers?

oakley6575

iTrader: (3)

For intake and exhaust I can do $130 shipped with the pedestals.

k_cash1432

iTrader: (9)

How much for everything shipped to 69152? Very interested! Text me 308 546 7499 PayPal ready

oakley6575

iTrader: (3)

Let me get a shipping quote tomorrow afternoon and I will send you a PM

Lazered98

iTrader: (4)

I'll take them as long as they are in good shape. What's your Paypal?

oakley6575

iTrader: (3)

All PM's replied to.

LS1BADZ

iTrader: (5)

If kCash falls through I'd be interested in the intake

oakley6575

iTrader: (3)

Rockers sold!

oakley6575

iTrader: (3)

I just took a look at the accessory bolt holes on one side of one of the heads. Two of the holes are buggered up. Not sure if they just need a thread repairer run through them or if they need to be drilled and repaired. You can just use that head on the passenger side and you would be good to go.

oakley6575

iTrader: (3)

All PM's replied to. There is a lot of interest. Someone pull the trigger

oakley6575

iTrader: (3)

Sold!