LSX Tall-Deck Block 19260100
07-26-2013, 10:05 AM
#1
Teching In
Thread Starter
Join Date: Apr 2002
Location: Park Ridge, IL
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
LSX Tall-Deck Block 19260100 I'm picking up this block today, has anyone used it yet? If so, anything besides the taller deck that I should be aware of? I'm planning on using MAst 305cc LS7 heads, unless there's a better alternative. I'll probably top it off with a Hogan's manifold. It'll be twin-turbocharged similar to my previous 1200hp TT Corvette.
I'm targeting around 1500hp on pump gas.
I'm targeting around 1500hp on pump gas.
07-28-2013, 08:47 AM
#2
Teching In
Thread Starter
Join Date: Apr 2002
Location: Park Ridge, IL
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I picked up the tall-deck LSX block Friday.
http://montygwilliams.com/1972corvet...ront_close.JPG
http://montygwilliams.com/1972corvette/LSX_top_left.JPG
http://montygwilliams.com/1972corvet...ottom_left.JPG
The Mast heads should arrive in about 2 weeks, then I'll begin fabricating the exhaust/turbo system. Once the fab is done, I'll take the block back for boring, align-honing, machining for 1/2" head studs, decking, and maybe larger main studs and lifters.
http://montygwilliams.com/1972corvet...ront_close.JPG
http://montygwilliams.com/1972corvette/LSX_top_left.JPG
http://montygwilliams.com/1972corvet...ottom_left.JPG
The Mast heads should arrive in about 2 weeks, then I'll begin fabricating the exhaust/turbo system. Once the fab is done, I'll take the block back for boring, align-honing, machining for 1/2" head studs, decking, and maybe larger main studs and lifters.
Last edited by Monty; 07-28-2013 at 08:59 AM.
04-07-2016, 01:43 PM
#4
Teching In
Join Date: Mar 2016
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
