PROJECT JUICE 2 updated pics and status
08-31-2013, 09:40 PM
#1
9 Second Club
Thread Starter
iTrader: (34)
Join Date: Mar 2005
Location: SPRINGFIELD MISSOURI
Posts: 2,248
Likes: 0
Received 0 Likes
on
0 Posts
PROJECT JUICE 2 updated pics and status Well I will ad to my other post when I get a chance but wanted to share some pics and status updates on the car. For those of you who know me my brother Josh 417LSX. and I started building this car together as a brother build and wanted to build one fast nitrous car and hoping to enter it in LSX Real street.
Car is a 99 camaro with 42k miles we bought it as a roller 6 years ago off tech.
We used to have a stock camed ls1 that ran 11.0s on it we parted ways with it and re did the whole car.
Thanks to these guys for the help in the build.
Blake at 417motorsports. did the FAB work and a big part of the build and knows how to make a car fast by weight reduction and power.
Dave @ Nitrous Outlet
Mike on the Building the engine.
Brandon Ball did the paint work.
Car specs
414 solid roller
Trick flow 245s done by TEA
Bullet Racing cam
Yella terras new solid roller rockers 1.7 7/16stud bolt.
Bullet racing solid lifters.
Super VIC ported
Wilson 45OO t.b
4500 Adapter plate
80lb injectors.
Block half filled.
Nitrous outlet spray bar.
Magna fuel system.
Champion wheels
M/T tires
417motorsports front end delete and ABS delete kit
This is halfway after we started what it looked like
started plumbing all the fuel last week.
EYE CANDY
Just got the NITROUS OUTLET kit in this week and wiring it up monday. We are trying to make some test hits at LSFEST at KY. Ill update pics as we make more progress.
Car is a 99 camaro with 42k miles we bought it as a roller 6 years ago off tech.
We used to have a stock camed ls1 that ran 11.0s on it we parted ways with it and re did the whole car.
Thanks to these guys for the help in the build.
Blake at 417motorsports. did the FAB work and a big part of the build and knows how to make a car fast by weight reduction and power.
Dave @ Nitrous Outlet
Mike on the Building the engine.
Brandon Ball did the paint work.
Car specs
414 solid roller
Trick flow 245s done by TEA
Bullet Racing cam
Yella terras new solid roller rockers 1.7 7/16stud bolt.
Bullet racing solid lifters.
Super VIC ported
Wilson 45OO t.b
4500 Adapter plate
80lb injectors.
Block half filled.
Nitrous outlet spray bar.
Magna fuel system.
Champion wheels
M/T tires
417motorsports front end delete and ABS delete kit
This is halfway after we started what it looked like
started plumbing all the fuel last week.
EYE CANDY
Just got the NITROUS OUTLET kit in this week and wiring it up monday. We are trying to make some test hits at LSFEST at KY. Ill update pics as we make more progress.
Last edited by dnkynrbk; 09-15-2013 at 09:12 PM.
09-02-2013, 03:48 PM
#2
TECH Resident
iTrader: (3)
Join Date: Mar 2009
Location: Bonne Terre, MO
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Car looks good. I have the same wheels, which rear brake set up did u go with, and did u have to grind them? I had to grind my aerospace set up quite a bit.
09-12-2013, 10:03 AM
#6
9 Second Club
Thread Starter
iTrader: (34)
Join Date: Mar 2005
Location: SPRINGFIELD MISSOURI
Posts: 2,248
Likes: 0
Received 0 Likes
on
0 Posts
Ill post vids tom. 1st pass on a 100 shot mild tune nitrous controler shuttibg off at 6800 went a 6.01 1/8. 9.40. 1/4. 2nd pass went low 9s I. Taking it to the track tonight ill get vids and slips. Cam spins to 8600 with no issues
