Custom T6 truck manifold turbo hotside
01-13-2014, 10:51 AM
#1
Custom T6 truck manifold turbo hotside Category: Accessories
Price: $600
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): PA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Ok looks like I will be completely rebuilding my hot side. So I am looking to sell my current Hot side. It will include Manifolds, Crossover, Turbo brace, and 50mm JGS wastegate with 2 spare springs. Looking for $600 shipped for all of this.
Truck manifolds have had flanges cut off and v bands attached. This will clear a alternator in the stock location.
This kit will require standing up and moving the rad. and welding some nuts into the frame rails to bolt the turbo brace to.
A stock water pump will not fit with this setup. Will require either a race style pump or a remote mounted pump like I have. A stock pump will fit if the brace was remade a little different but the pulley would just the brace the way it is made now.
The Crossover is a 2.5" divided and has a divided flange for anyone that has a divided housing. Standard housings would still work.
My car has been 8.62@157 with this setup and a cheap ebay air to air intercooler that was causing a restriction.
More pictures of the kit being built can be seen in my build thread that is linked in my sig
Last edited by dschmittie1; 01-27-2014 at 08:33 PM.
