HotRodV6

iTrader: (6)

Category: Drivetrain
Price: $2800
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): TX
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LT1/LT4, Small Block, Big Block
LS Engine?: Non-LS Part

I have a 93 M29 Close Ratio T56, it has the same gear ratios as the 2001-2004 ZO6 corvettes. It has been freshly rebuilt to stage 2 specs by Texas Drivetrain Performance in Ft. Worth. It has the bell housing, clutch fork and pivot, & the slave cylinder spacer. I also have a lightly used B&M Ripper shifter with a B&M Hammer T-Handle, a new bronze shifter bushing, and a new stock replacement clutch kit that goes with the trans, and a stock replacement flywheel.

This trans does not have the skip shift solenoid, it was removed from a 93 trans am and was stuck in third gear when i bought it, i thought it was a busted shift fork, but it turned out that one of the synchronizer keys came loose on third gear causing it to be locked in gear. everything else in the trans was very clean, only some slight wear on the main shaft, which TDP welded up the shaft and machined it back down so that the gear/bearing has an actual press fit rather than the factory slip fit.


Any questions, feel free to ask.

HotRodV6

iTrader: (6)

bump ttt

HotRodV6

iTrader: (6)

bump ttt

sick_tight

quality company over there! took one of my transmissions over there. GLWS

1slow94z28

I remember when the kid slammed it into gear and it got stuck almost 3 years ago. This transmission came from long island new york. Nice to see it finally got rebuilt. Bump!

HotRodV6

iTrader: (6)

I cant confirm, nor deny this info. All i can say is that i bought it from a salvage yard in Houston, it was already out of the car. Cool story though.

HotRodV6

iTrader: (6)

bump ttt

HotRodV6

iTrader: (6)

Bump ttt

Wanted to add that i now have the slave cylinder spacer and a stock replacement flywheel and that the clutch kit will come with ARP pressure plate bolts.

HotRodV6

iTrader: (6)

2800 shipped for everything is a hell of a deal!!