milled heads with stock pushrods?
#1
TECH Apprentice
Thread Starter
Join Date: Apr 2002
Location: Sheboygan, WI
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
milled heads with stock length pushrods?
Just wondering, I now (finally) have the motor back together with all of the work done to include the heads have been milled .030.
My question is... I put the motor back together with the hardened (Thunder racing) 7.4" (Stock length) pushrods that I had in there before and was wondering, Is this going to be okay?
Thanks!
Troy
My question is... I put the motor back together with the hardened (Thunder racing) 7.4" (Stock length) pushrods that I had in there before and was wondering, Is this going to be okay?
Thanks!
Troy
Last edited by TK 14 SS; 05-26-2004 at 10:00 AM.
#5
TECH Apprentice
Thread Starter
Join Date: Apr 2002
Location: Sheboygan, WI
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Allright, thanks guys. I put in a new custom grind Comp cam (from Combination Motorsports) so thinking (hoping) that it will be okay.
But I have to admit, I obviously addressed this possible issue a little late, didn't I ?
Onyxxtreme - you made my heart skip a beat at first
But I have to admit, I obviously addressed this possible issue a little late, didn't I ?
Onyxxtreme - you made my heart skip a beat at first