Just Curious, has anybody "viewed" Hypertech changes with LS1Edit or other?
#2
Its possible with LS1 edit. Just do a before and after read of the PCM. Then look at all the differences in the tables. I wasn't impressed when I looked at it years ago, don't remember the differences anymore.
#4
Launching!
iTrader: (1)
Join Date: Jan 2003
Location: Ohio
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
I'd love to get my hands on the tranny tables on a 98 f-body after an hpp3 install. I'd like to see what hpp3 did to the tranny at 50% and 75%. Wish I would've held on to mine long enough to install it and do a read and save it.
#5
TECH Veteran
iTrader: (6)
I did one. When I first got my car I had an HPP3 to adjust for the rearend and fans. Later when I got LS1Edit I installed the entire HPP3 tune (the "performance" BS tune) and downloaded it with LS1Edit. Then sold the HPP3 to someone else and had the HPP3 on hand to see what they were actually doing. It was basically:
- pull fuel (leaner = more HP)
- add advance
I didn't use it (was not a good tune even for stock....wouldn't work well with my cam ) and have over time lost it (reboots/new computers/lost CDs/etc)....
- pull fuel (leaner = more HP)
- add advance
I didn't use it (was not a good tune even for stock....wouldn't work well with my cam ) and have over time lost it (reboots/new computers/lost CDs/etc)....
#6
11 Second Club
iTrader: (2)
Join Date: Nov 2001
Location: Sunny San Diego
Posts: 3,066
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 0rion
I'd love to get my hands on the tranny tables on a 98 f-body after an hpp3 install. I'd like to see what hpp3 did to the tranny at 50% and 75%. Wish I would've held on to mine long enough to install it and do a read and save it.
Trending Topics
#8
12 Second Club
iTrader: (3)
Join Date: Jan 2004
Location: S.FL
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ed Blown Vert
I had one posted on www.ls1edit.com but can't get to the files
#9
Launching!
iTrader: (1)
Join Date: Jan 2003
Location: Ohio
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I can't get to them either. Jancarich, can you send it to me? ibzrg6@aol.com?
Last edited by 0rion; 06-08-2004 at 11:10 PM.
#10
12 Second Club
iTrader: (3)
Join Date: Jan 2004
Location: S.FL
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 0rion
Yeah, I can't get to them either. Jancarich, can you send it to me? ibzrg6@aol.com?