01 WS6 dyno lid, cutout,pully only
#1
On The Tree
Thread Starter
Join Date: Apr 2004
Location: Houston, Texas
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
01 WS6 dyno lid, cutout,pully only
this was at HPE. first pull 332/349 second pull 330/348.with 71000 miles.this is with slp lid,asppully,and cutout only.what do you think..
Trending Topics
#9
On The Tree
Thread Starter
Join Date: Apr 2004
Location: Houston, Texas
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Billiumss
Your torque numbers don't match your mods, unless it's an auto. What was the A/F ratio?
I was impressed along with others at HPE, espeacialy with an M6 tranny. Factory Freak maybe?! ( also never been to the track for time slips, but have put 1-1/2 lengths on 2 stock 04 cobras by the top of third gear!) Iam pleased.
#11
TECH Fanatic
iTrader: (12)
The horsepower/torque numbers match perfectly for a stock M6 car with lid/cutout.
3 years ago my '01 Formula put down 333rwhp/351rwtq with just a lid/cutout with only about 600 miles on the car.
FWIW. My car ran a few 12.8x passes with just the lid/cutout, high 1.9x-low2.0x short times.
3 years ago my '01 Formula put down 333rwhp/351rwtq with just a lid/cutout with only about 600 miles on the car.
FWIW. My car ran a few 12.8x passes with just the lid/cutout, high 1.9x-low2.0x short times.
#15
TECH Senior Member
iTrader: (21)
I just layed down 355/366 on a mustang dyno last sat...im only lid/cutout 27k miles....screwy dyno??