Header Install On 02 Ws6 How Hard?
10-06-2004, 11:13 AM
#1
Teching In
Thread Starter
Join Date: Oct 2004
Location: DALLAS TEXAS
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Header Install On 02 Ws6 How Hard? Well my buddy just got headers for his WS6,im going to install this weekend just curiuos how long this might take and how tuff is this job,Ive installed headers on my LT1 car but never on LS1 car.oh if there's any tricks i would appreciate the info.how much would be a decent price to pay for someone else to install them.THANK ALOT for any info 
Last edited by STROKENLT1; 10-06-2004 at 11:27 AM.
10-06-2004, 01:45 PM
#3
Most have found it totally IMPOSSIBLE to install headers on an '03 WS6. 
On an '02 it will take some time but isn't too difficult (unless they are SLP LTs) if you're machanically inclined.
On an '02 it will take some time but isn't too difficult (unless they are SLP LTs) if you're machanically inclined.
Trending Topics
10-07-2004, 07:07 PM
#8
Staging Lane
Join Date: Nov 2003
Location: Westminster, CO
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
When I put my headers in they slid in real easy. I lowered my K-member about an inch to give some more clearence. The part that took the longest was getting out the exhaust manifolds and cats. It shouldn't take too long it is fairly easy to do.
10-07-2004, 07:53 PM
#10
I had no experience working on cars and installed my FLP headers and the rest of the exhaust in a day and a half by my self. I could of got it done all in one day but ran into complications with the stock cat bolts and ended up having to saw them off. Also had to get a new dipstick because I was impatiant and tried to bend it to get it back in. DO NOT BEND THE DIPSTICK! Its a pain in the *** but just take your time, it will go back in. I have heard LS1 headers are easier to install then LT1. So if you have done an LT1 you should be fine. Good luck.
